The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.
When a tire pressure monitoring sensor fails, the tire pressure monitoring system control module will recognize a loss in communication and turn on the warning lamp which indicates the failure. This is most often the case. However, the tire pressure monitoring sensor may also fail by reporting incorrect tire pressures. This could cause a flat tire to go unrecognized, or a properly inflated tire to signal a low or high tire pressure warning.
When a relearn is needed, for any reason, the TPMS warning light will illuminate, and many vehicles will display a message relating to the TPMS system being inoperative or loosing communication. It is important to keep a watchful eye on tire pressures when this system is having issues because there is no warning available for underinflation or overinflation of the tires.
Wheels offer very few symptoms, but these symptoms should never be ignored. Visible cracks on the wheels may appear, especially after hitting a large bump, Most often, this will also be accompanied by loss of air from the tire on that wheel. Also, vibration in the steering wheel is very common when the tire is out of balance, and improper wheel nuts or bolts can cause creaking and popping noises to develop. Again, there are very few symptoms, but they should not be ignored.
The only symptoms of a TPMS control module failure are failing to alert the driver of underinflation or overinflation of one or more tires, failure to communicate with the body control module or TPMS sensors, or erroneously reporting incorrect tire pressure.
The only symptoms requiring diagnosis for the tire pressure monitoring system warning lamp is if the warning lamp has illuminated while the tires have correct air pressure, or if the air pressure for the tires is out of specification and the warning lamp is off. This is because the overwhelming majority of cases where the TPMS lamp illuminates is due to the change in ambient temperature.
To effectively diagnose the tire pressure warning light issue in your 2013 Dodge Journey, start with the simplest solutions before moving on to more complex diagnostics. Begin by checking the tire pressure of all four tires, ensuring they are inflated to the manufacturer's recommended levels. This step is crucial as both over-inflation and under-inflation can trigger the warning light. Next, inspect each tire for any visible signs of leaks or damage, as a tire that cannot hold air will also cause the warning light to remain illuminated. If the tires are in good condition, consider resetting the tire pressure monitoring system (TPMS) sensors, which can often be done by pressing a reset button on the dashboard or following the instructions in your owner's manual. Additionally, keep in mind that cold weather can affect tire pressure, so if you are in a colder climate, this may be a contributing factor. If the warning light persists without displaying specific tire pressures, it may indicate an issue with the TPMS itself. After inflating any low tires, take your vehicle for a drive at speeds above 15 mph for at least 20 minutes to allow the system to reset. If these steps do not resolve the issue, it may be time to consult a professional mechanic for further diagnosis and repair. By following this structured approach, you can efficiently identify and address the cause of the tire pressure warning light in your Dodge Journey.
When the tire pressure warning light remains illuminated in a 2013 Dodge Journey, it can be frustrating for DIYers trying to diagnose the issue. One of the most frequent culprits is a tire with low air pressure, which can occur due to a slow leak or puncture. It's essential to check each tire's pressure with a reliable gauge to ensure they are inflated to the manufacturer's recommended levels. If the pressures are normal, the problem may lie within the tire pressure monitoring system (TPMS) itself. A faulty sensor, often indicated by a blinking light, could be malfunctioning due to a depleted battery or damage. Additionally, extreme temperature fluctuations can affect tire pressure readings, so consider the environmental conditions when troubleshooting. If the light persists despite normal tire pressures, resetting the TPMS may be necessary, or you might need to inspect the TPMS receiver module for any electrical issues. Understanding these common problems can help you effectively address the tire pressure warning light and ensure your vehicle remains safe and roadworthy.
Addressing the tire pressure warning light that remains illuminated in a 2013 Dodge Journey is of utmost urgency due to the significant safety risks it poses. When this warning light stays on, it often indicates either low tire pressure or a malfunction within the tire pressure monitoring system (TPMS). Ignoring this alert can lead to dangerous driving conditions, as underinflated tires can result in increased tire wear, reduced fuel efficiency, and a higher likelihood of tire blowouts. In fact, statistics show that underinflated tires contribute to numerous accidents, with over 200 fatalities linked to tire-related crashes each year. Additionally, if the issue lies with a faulty TPMS sensor rather than the tire pressure itself, it is crucial to rectify this malfunction promptly to ensure the system functions correctly. Therefore, it is essential for drivers to take immediate action when the tire pressure warning light remains on, not only to safeguard their own safety but also to prevent costly tire damage and ensure optimal vehicle performance.
Read about related problems experienced by other Dodge Journey drivers like you.
See what others are asking about their Dodge Journey. Get answers from RepairPal's community of auto experts and enthusiasts.
