The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.
When a tire pressure monitoring sensor fails, the tire pressure monitoring system control module will recognize a loss in communication and turn on the warning lamp which indicates the failure. This is most often the case. However, the tire pressure monitoring sensor may also fail by reporting incorrect tire pressures. This could cause a flat tire to go unrecognized, or a properly inflated tire to signal a low or high tire pressure warning.
When a relearn is needed, for any reason, the TPMS warning light will illuminate, and many vehicles will display a message relating to the TPMS system being inoperative or loosing communication. It is important to keep a watchful eye on tire pressures when this system is having issues because there is no warning available for underinflation or overinflation of the tires.
Wheels offer very few symptoms, but these symptoms should never be ignored. Visible cracks on the wheels may appear, especially after hitting a large bump, Most often, this will also be accompanied by loss of air from the tire on that wheel. Also, vibration in the steering wheel is very common when the tire is out of balance, and improper wheel nuts or bolts can cause creaking and popping noises to develop. Again, there are very few symptoms, but they should not be ignored.
The only symptoms of a TPMS control module failure are failing to alert the driver of underinflation or overinflation of one or more tires, failure to communicate with the body control module or TPMS sensors, or erroneously reporting incorrect tire pressure.
The only symptoms requiring diagnosis for the tire pressure monitoring system warning lamp is if the warning lamp has illuminated while the tires have correct air pressure, or if the air pressure for the tires is out of specification and the warning lamp is off. This is because the overwhelming majority of cases where the TPMS lamp illuminates is due to the change in ambient temperature.
When dealing with the tire pressure warning light in your Dodge Journey, start by checking the tire pressures of all four tires using a reliable pressure gauge. Ensure that each tire is inflated to the manufacturer's recommended PSI, which can typically be found on a sticker inside the driver's door. If you find any tires are low, inflate them accordingly and monitor if the warning light turns off after driving for about 20 minutes at speeds above 15 mph, as this allows the Tire Pressure Monitoring System (TPMS) to recalibrate. If the light remains illuminated, inspect for visible signs of damage or leaks in the tires, such as punctures or cracks. Additionally, consider the condition of the tire pressure sensors; a malfunctioning sensor can also trigger the warning light. If you suspect a sensor issue, you can attempt to reset the TPMS by turning the ignition to the "On" position without starting the engine, pressing and holding the TPMS reset button until the light blinks three times, and then starting the vehicle. If the light persists after these steps, it may be time to consult a professional for further diagnostics, as the problem could lie within the TPMS itself or other related components. By following this methodical approach, you can effectively troubleshoot and potentially resolve the tire pressure warning light issue in your Dodge Journey.
When dealing with the tire pressure warning light in your Dodge Journey, it's essential to recognize the common problems that may trigger this alert. Low tire pressure is the most frequent culprit, often caused by natural air loss, punctures, or temperature changes. Additionally, a faulty tire pressure sensor can lead to false warnings, indicating an issue when there isn't one. If the light remains illuminated even after checking the tire pressures, inspect for leaks or damage to the tires, as a wheel that fails to hold air can also be a significant factor. Furthermore, the Tire Pressure Monitoring System (TPMS) itself may malfunction, necessitating a reset or even replacement. To address these issues, start by checking each tire with a pressure gauge and inflating any that are below the recommended PSI. If the light persists, follow the reset procedure for the TPMS, which involves turning the ignition to the "On" position and pressing the reset button until the light blinks. By understanding these common problems and their solutions, you can effectively troubleshoot and maintain your vehicle's tire pressure monitoring system, ensuring a safer driving experience.
When the Tire Pressure Warning Light remains illuminated in your Dodge Journey, it is crucial to address the issue promptly to ensure your safety on the road. Ignoring this warning can lead to serious consequences, such as reduced vehicle handling, increased tire wear, and even tire blowouts, which can pose significant risks to you and other drivers. The light may indicate low tire pressure due to a leak, a malfunctioning tire pressure monitoring system, or other underlying issues that require immediate attention. If you have already checked and corrected the tire pressures but the light persists, it may signal a deeper problem that could lead to costly repairs if left unresolved. Therefore, it is essential to diagnose the cause of the warning light and take appropriate action, whether that involves checking for leaks, replacing faulty sensors, or resetting the TPMS system. By addressing these issues promptly, you can maintain optimal vehicle performance and ensure a safer driving experience.
Read about related problems experienced by other Dodge Journey drivers like you.
See what others are asking about their Dodge Journey. Get answers from RepairPal's community of auto experts and enthusiasts.