2022 Chrysler Voyager Radiator Fan Isn't Working

Fixing the Non-Functional Radiator Fan in Your 2022 Chrysler Voyager

Find Repair Location
Reviewed by
Devin Cabugcal
Written by RepairPal Car Genius
Updated January 14, 2025
0%
34% chance it's the
Fan Motor or Clutch
0%
28% chance it's the
Fan Relay or Fuse
0%
23% chance it's the
Temp Sensor or Fan Control Module
0%
15% chance it's
Something else
The most common reasons a 2022 Chrysler Voyager radiator fan isn't working are the fan assembly, the fan clutch, or the coolant temperature sensor.
  • Fan Motor or Clutch: A faulty fan motor or a malfunctioning fan clutch can result in inadequate cooling, causing the engine to overheat.
  • Fan Relay or Fuse: A faulty fan relay or blown fuse can prevent the cooling fan from operating, leading to engine overheating.
  • Temp Sensor or Fan Control Module: A faulty temperature sensor or fan control module can result in incorrect readings, causing the engine to overheat or the cooling fan to operate improperly.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a 2022 Chrysler Voyager radiator fan isn't working?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

Over time serpentine belts stretch, crack, and the ribs that ride on the accessory pulleys being to wear smooth. A squealing noise that increases with engine speed or as engine driven accessories are turned on may be noted. The noise is caused by the belt slipping on the pulleys, insufficiently driving them. Ineffective air conditioning, a battery warning light, or intermittent power steering assist can result from this.

»MORE: Symptoms of a bad serpentine belt

The bad thermostat can cause two different sets of problems, depending on whether it's stuck open or stuck closed.

A thermostat that is stuck open can cause the engine to run colder than normal and turn on the check engine light. It may also cause poor fuel mileage and the heater to blow cool air.

A thermostat that is stuck closed will cause the vehicle to overheat. If a new thermostat doesn't resolve engine temperature problems, the cooling system needs to be checked for other issues.

» LEARN MORE: Signs of a bad thermostat, and how to fix it

When the engine coolant temperature sensor fails, it will send inaccurate information to the vehicle’s computer, causing the computer to react to false operating conditions. This will cause the engine to consume more fuel than normal, depleting fuel mileage, and causing black, sooty smoke from the engine under moderate to heavy acceleration. The check engine light will illuminate, and on-board diagnostic trouble codes may be stored for exhaust and emission system failure, fuel delivery system failure, and engine cooling system failure. Overheating may also occur, as the coolant sensor may be leaking fluid out of the engine, creating a an air pocket in the system.

When the radiator fans stop functioning properly, the engine temperature will rise. The spike in temperature will be highest when the vehicle is idling at a stop, but should subside once the vehicle begins moving again.

Additionally, the air conditioner typically won't blow as cold. This is because the air from the radiator fans also blows across the air conditioning condenser, so when the fans fail, both systems suffer.

You'll also usually see the check engine light and notice a drop in fuel economy. It's possible the fan will start making noise if it's failing, as well.

What are the initial diagnostic steps to take when the radiator fan isn't working on a 2022 Chrysler Voyager?

When faced with a non-functioning radiator fan in your 2022 Chrysler Voyager, it's essential to adopt a systematic diagnostic approach. Begin by checking the fuse associated with the radiator fan, as a blown fuse is a straightforward and common issue that can easily be resolved. Next, inspect the relay that controls the fan; a malfunctioning relay can disrupt the fan's operation and is relatively simple to replace. If these initial checks do not reveal the problem, examine the fan motor for any signs of damage, as a faulty motor will require replacement to restore functionality. Additionally, ensure that the fan blades are free from obstructions and not damaged, as this can hinder their ability to spin effectively. It's also crucial to verify the coolant level in the radiator, as low levels can trigger safety mechanisms that prevent the fan from operating. Finally, consider using a diagnostic scanner to check for error codes that may provide insight into specific issues affecting the fan system. By following this structured approach, you can efficiently diagnose and address the radiator fan issue, ensuring your vehicle remains in optimal working condition.

What are the common problems that could cause the radiator fan to stop working in a 2022 Chrysler Voyager?

When diagnosing why the radiator fan in a 2022 Chrysler Voyager has stopped working, it's essential to consider several common issues that could be at play. A faulty fan motor is often the primary culprit; if the motor fails, the fan will not spin, leading to inadequate cooling of the radiator. Additionally, a blown fuse can interrupt the power supply to the fan, so checking the fuse box for any blown fuses is a crucial step in your troubleshooting process. Another potential issue is a faulty relay, which controls the fan's operation; replacing a malfunctioning relay can restore functionality. Furthermore, the coolant temperature sensor plays a vital role in signaling the fan to turn on; if this sensor is defective, it may not send the necessary signal, resulting in the fan remaining off. Wiring issues, such as damaged or loose connections, can also prevent the fan from operating correctly, so inspecting the wiring is advisable. Lastly, ensure that the overall cooling system is functioning properly, as problems like low coolant levels or a malfunctioning water pump can indirectly affect the radiator fan's performance. By systematically addressing these common problems, you can effectively troubleshoot and resolve issues with the radiator fan in your Chrysler Voyager.

How urgent is it to address the non-working radiator fan in a 2022 Chrysler Voyager?

Addressing a non-working radiator fan in a 2022 Chrysler Voyager is an urgent matter that should not be overlooked. The radiator fan plays a crucial role in regulating the engine's temperature by dissipating heat, and when it fails, the risk of engine overheating significantly increases. This overheating can lead to severe engine damage, including warped cylinder heads or a blown head gasket, which can result in costly repairs and extensive downtime. Moreover, an overheating engine may shut down unexpectedly, leaving you stranded and potentially facing dangerous situations on the road. By promptly addressing the issue of a malfunctioning radiator fan, you not only safeguard your vehicle's performance but also ensure your safety and peace of mind while driving. Therefore, if you notice any signs of a non-working radiator fan, it is imperative to take action immediately to prevent further complications and maintain the optimal functioning of your Chrysler Voyager.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.