2010 Chrysler Sebring Is Leaking Oil

Discovering the Causes of Oil Leaks in Your 2010 Chrysler Sebring and How to Fix Them Effectively

Find Repair Location
Reviewed by
Bo Fader
Written by RepairPal Car Genius
Updated January 14, 2025
0%
80% chance it's the
Oil System Components
0%
20% chance it's the
Engine Gaskets
The most common reasons a 2010 Chrysler Sebring is leaking oil are oil system component failure and leaking engine gaskets.
  • Oil System Components: A worn or damaged oil pump or filter can lead to low oil pressure, resulting in inadequate lubrication and potential engine damage.
  • Engine Gaskets: A worn or damaged engine gasket can lead to oil or coolant leaks, resulting in engine overheating or loss of lubrication.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

What are the best Chrysler repair shops?

RepairPal Certified shops can diagnose and repair your 2010 Chrysler Sebring engine and performance issues. They provide transparent pricing with a minimum 12-month or 12,000-mile warranty on repairs and services.
30 Certified Locations
Shop Image

Tuffy Tire & Auto Service Center - Grandview

4.7
(85)
2.39 mi
1524 W 5th Ave
Columbus, OH
Open
Closes 5:00 PM
Call
Shop Image

Excite Auto Repair & Towing

4.4
(15)
5.94 mi
3430 Westerville Road
Columbus, OH
Open
Closes 6:00 PM
Call
Shop Image

All In Auto Service

4.9
(25)
6.56 mi
5200 Fisher Road
Columbus, OH
Open
Closes 6:00 PM
Call
Shop Image

Tuffy Tire & Auto Service - Grove City

4.4
(520)
6.67 mi
2131 Stringtown Rd
Grove City, OH
Open
Closes 6:00 PM
Call
See All 30 Locations

How much does it cost to fix a 2010 Chrysler Sebring is leaking oil?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

Oil pans don't wear out or break like other parts, they generally only need to be replaced because of external damage from an accident or an improperly tightened drain plug. The main symptom you will experience is an oil leak underneath the engine of your car. The oil that leaks from a damaged oil pan will range from dark brown to dark black. If the leak is large enough or occurs for long enough the oil level will be low enough to turn the oil pressure or low oil level warning light on.

The engine oil pressure warning light will come on if the engine oil pressure is low, or if the oil pressure sensor is faulty. In either case, engine power may be reduced significantly. The check engine light may also illuminate, and an on-board diagnostic (OBD) trouble code will be stored in the vehicle's computer.

What are the steps to diagnose the oil leak in a 2010 Chrysler Sebring?

To effectively diagnose an oil leak in your 2010 Chrysler Sebring, start by locating the source of the leak. Begin by examining the area beneath your vehicle for any oil spots, which can provide clues about where the leak is originating. Once you have a general idea, inspect the oil pan for any visible damage or loose bolts, as these are common culprits. Next, check the oil filter to ensure it is properly installed and free from leaks. Don’t overlook the oil drain plug; make sure it is secure and consider replacing the gasket if it appears worn. Additionally, examine the valve cover gasket and oil pressure sensor for any signs of leakage, as these components can also contribute to oil loss. Finally, broaden your inspection to include other potential sources such as oil cooler lines or the rear main seal. By following this systematic approach, you can efficiently identify and address the oil leak, ensuring your Sebring runs smoothly.

What are the common causes of oil leaks in a 2010 Chrysler Sebring?

When dealing with oil leaks in a 2010 Chrysler Sebring, it's crucial to understand the common culprits that may be at play. One frequent issue is a worn or damaged oil pan gasket, which can deteriorate over time and lead to significant leaks. Additionally, the valve cover gasket, which seals the valve cover to the cylinder head, is another common source of leaks as it can also wear out. Another potential problem area is the oil filter housing gasket; if this component fails, it can result in oil escaping from the engine. Furthermore, the rear main seal, located at the back of the engine, is known to develop leaks as the vehicle ages. Lastly, don’t overlook the oil cooler lines, as leaks in these lines can contribute to oil loss as well. Addressing these issues promptly is essential to prevent further engine damage and maintain the vehicle's performance, making regular inspections and maintenance key to keeping your Sebring in top shape.

How urgent is it to address the oil leak in my 2010 Chrysler Sebring to prevent further damage?

Addressing an oil leak in your 2010 Chrysler Sebring is not just a matter of routine maintenance; it is an urgent necessity to safeguard your vehicle's health. Oil leaks can escalate quickly, transforming minor issues into major repairs that could strain your budget and compromise your vehicle's performance. Common culprits behind these leaks include failing oil system components and deteriorating engine gaskets, which can lead to significant engine damage if left unchecked. By identifying and rectifying the source of the leak promptly, you can prevent further complications that may arise from oil loss, such as overheating or engine failure. Regular inspections and maintenance are key to catching these issues early, ensuring that your Sebring remains reliable and efficient. Therefore, if you notice any signs of an oil leak, it is crucial to take immediate action to protect your investment and maintain the longevity of your vehicle.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.