2006 Chrysler Sebring Windshield Wipers Aren't Working

Troubleshooting Common Issues with 2006 Chrysler Sebring Windshield Wipers and How to Fix Them

Find Repair Location
Reviewed by
Andrew Hajjar
Written by RepairPal Car Genius
Updated January 14, 2025
0%
75% chance it's the
Wiper Motor
0%
25% chance it's the
Switch
The most common reasons a 2006 Chrysler Sebring windshield wipers aren't working are broken wiper motor and issues with the switch.
  • Wiper Motor: A faulty wiper motor or a bad electrical connection can result in intermittent or non-functioning windshield wipers.
  • Switch: A faulty switch can result in intermittent or complete failure of the electrical component it controls, leading to malfunctioning systems.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a 2006 Chrysler Sebring windshield wipers aren't working?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

A failed windshield wiper motor will do one of two things in the event of failure. First, it can intermittently work, meaning when the wiper switch is turned on, the windshield wipers may activate, and run for a random amount of time. This may happen at random, or change with a bump. Lastly, the windshield wipers could show no signs of activity, indicating motor failure.

The moment water touches the windshield, you know if you need new windshield wiper blades. If your wiper blades are torn, cracked, hard, or brittle, it is time for replacement. Wipers should also be replaced if the wiper blades only smear water around, seem to make a mess, streak the windshield, and miss large patches. If you are unhappy with the current wiper blades on your vehicle, this is a very economical change to make.

Windshield wiper arms will be replaced mainly for aesthetic reasons or damage. If the windshield arms become bent or rusted, the windshield wipers may not contact the windshield at the proper angle, or there may be no contact at all. Also, the sun will take a toll on these parts after years of use, and fading or clear coat peeling will result, not to mention rust.

What are the steps to diagnose the non-functioning windshield wipers on a 2006 Chrysler Sebring?

To effectively diagnose non-functioning windshield wipers on a 2006 Chrysler Sebring, start with a systematic approach that prioritizes simpler solutions before delving into more complex issues. Begin by checking the fuse associated with the windshield wipers, as a blown fuse is a common and easily fixable problem. If the fuse is intact, proceed to inspect the wiper motor; ensure that power is reaching the motor when the wiper switch is activated. If the motor is receiving power but remains unresponsive, it may need replacement. Next, examine the wiper linkage for any signs of damage or disconnection, as this could hinder the wipers' movement. Following this, test the wiper switch located on the steering column to confirm it is functioning correctly and sending signals to the motor. Lastly, don’t overlook the wiper blades themselves; worn or damaged blades can also contribute to the problem. By following this diagnostic approach, you can efficiently identify and resolve the issue with your windshield wipers.

What are the common problems that could cause the windshield wipers to stop working on a 2006 Chrysler Sebring?

When dealing with malfunctioning windshield wipers on a 2006 Chrysler Sebring, it's essential to understand the common problems that could be at play. A frequently encountered issue is a broken wiper motor, which can prevent the wipers from functioning altogether. Additionally, problems with the wiper switch can disrupt the normal operation, leading to intermittent or complete failure. If the wipers are stuck in one position or continue to operate even when turned off, this may indicate a shorted motor or a fault in the control system. Another common concern is the condition of the wiper blades themselves; torn or worn blades can hinder performance and visibility. Furthermore, if you notice the washer motor buzzing without any fluid being dispensed, this could signal a blockage or malfunction in the washer system. Lastly, a blown fuse or damaged wiring can also contribute to wiper issues. Regular maintenance and timely repairs are crucial to ensure that your windshield wipers operate effectively, enhancing your safety on the road.

How urgent is it to address the non-functioning windshield wipers on a 2006 Chrysler Sebring?

When it comes to the non-functioning windshield wipers on a 2006 Chrysler Sebring, the urgency of addressing this issue cannot be overstated. Windshield wipers are critical for maintaining visibility during adverse weather conditions, and their failure can significantly impair your ability to see the road, increasing the risk of accidents. Moreover, driving without functioning wipers may violate local road safety regulations, potentially leading to legal repercussions. Ignoring this problem not only compromises your safety but can also result in more extensive damage to the wiper system, leading to higher repair costs in the future. Therefore, it is essential to prioritize the repair of your windshield wipers to ensure a clear view of the road and to uphold both your safety and legal responsibilities while driving.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.

2006 Chrysler Sebring Windshield Wiper Problems | RepairPal