RepairPal Certified shops can diagnose and repair your 2007 Mercury Mountaineer. They provide transparent pricing with a minimum 12-month or 12,000-mile warranty on repairs and services.
ok.the reason i asked was because there was a guy on here the other night asking the same question about a Mercury Grand Marquis.BUT,they posted 4 different questions in a matter of a few minutes.first,they lost the key and had no spare,next where do you find the code for the door entry,because he forgot what it was?next,will a 2005 frame fit under a 1995 same car?didn't make sense to me.kinda sounded like they wanted to maybe steal the car,so a couple of us kindly told him to call the Local Police and they would be glad to help him,the end,they never replied back!anyways,try this below.good luck.post results..
Open the right/rear door. Fold the right/rear seat down. Carefully pull the trim panel where the right/rear seat belt pivot/height adjuster is housed. Once removed, pull the trim panel below that in order to expose the Vehicle Security Module (the module that controls the electronic locking system for your vehicle) that has the three electrical connectors plugged into it. The connectors are colored green, grey, and blue. On the module there is a label with the engineering number similar to 5L2T-15K602-EA. You will also see FIVE large numbers. Those FIVE large numbers are your Keyless entry keypad code. Once you know your keypad code, you can test its operation by first entering the FIVE digit keypad code to unlock the driver door, and then pressing the 3/4 button within 5 seconds to unlock ALL doors. Pressing the 5/6 button within 5 seconds after entering the code will unlock the liftgate glass. Pressing the 7/8 and 9/0 buttons simultaneously at any time will lock ALL doors. Hope this helps.
i bought the 2007 mountianeer used they did not know the code
ok.the reason i asked was because there was a guy on here the other night asking the same question about a Mercury Grand Marquis.BUT,they posted 4 different questions in a matter of a few minutes.first,they lost the key and had no spare,next where do you find the code for the door entry,because he forgot what it was?next,will a 2005 frame fit under a 1995 same car?didn't make sense to me.kinda sounded like they wanted to maybe steal the car,so a couple of us kindly told him to call the Local Police and they would be glad to help him,the end,they never replied back!anyways,try this below.good luck.post results.. Open the right/rear door. Fold the right/rear seat down. Carefully pull the trim panel where the right/rear seat belt pivot/height adjuster is housed. Once removed, pull the trim panel below that in order to expose the Vehicle Security Module (the module that controls the electronic locking system for your vehicle) that has the three electrical connectors plugged into it. The connectors are colored green, grey, and blue. On the module there is a label with the engineering number similar to 5L2T-15K602-EA. You will also see FIVE large numbers. Those FIVE large numbers are your Keyless entry keypad code. Once you know your keypad code, you can test its operation by first entering the FIVE digit keypad code to unlock the driver door, and then pressing the 3/4 button within 5 seconds to unlock ALL doors. Pressing the 5/6 button within 5 seconds after entering the code will unlock the liftgate glass. Pressing the 7/8 and 9/0 buttons simultaneously at any time will lock ALL doors. Hope this helps.