2020 Volvo XC60 Cruise Control Isn't Working

Common Causes of Cruise Control Malfunctions in Your 2020 Volvo XC60 and How to Fix Them

Find Repair Location
Reviewed by
Devin Cabugcal
Written by RepairPal Car Genius
Updated January 14, 2025
0%
30% chance it's the
Sensor
0%
25% chance it's the
Control Module
0%
25% chance it's the
Throttle
0%
20% chance it's
Something else
The most common reasons a 2020 Volvo XC60 cruise control isn't working are failed control module, sensor or switch issues, or throttle actuation problems.
  • Sensor: A faulty or malfunctioning sensor can lead to incorrect readings, causing issues with engine performance or other systems relying on accurate data.
  • Control Module: A faulty control module can lead to erratic vehicle behavior or failure of various electronic systems due to improper signal processing.
  • Throttle: A faulty throttle body or a defective accelerator pedal position sensor may be causing inconsistent throttle response.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a 2020 Volvo XC60 cruise control isn't working?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

In the event that a wheel speed sensor fails, the ABS, traction control system (TCS) and manufacturer specific stability control system lights will illuminate, informing the driver that the systems are disabled. The vehicle will be more prone to tire slip, and normal driving patterns may need to be adjusted to correct for the loss of computer control. On older vehicle's, the speedometer can be affected, causing illumination of the check engine light as well.

The cruise control switch can cause complete failure of the cruise control feature, but in a lucky scenario only partial functionality will be lost. This means that the cruise control may come on, but that it will not increase in speed automatically, or the cancel button does not work leading the driver to cancel cruise control with the foot brake. In some vehicles, the cruise control light may illuminate, or a warning message may be displayed due to lack of functionality.

What steps should I take to diagnose the cruise control issue in my 2020 Volvo XC60?

When diagnosing the cruise control issue in your 2020 Volvo XC60, it's essential to adopt a systematic approach that begins with the simplest checks before moving on to more complex diagnostics. Start by examining the cruise control fuse, as a blown fuse can easily disrupt functionality. Next, inspect the cruise control buttons on the steering wheel to ensure they are responsive and not faulty. Following this, verify the operation of the speed sensor, which is critical for the cruise control system's performance. If these initial checks do not reveal the problem, utilize a diagnostic scanner to identify any error codes that may indicate specific issues. Additionally, check the brake and clutch switches, as malfunctioning switches can prevent the cruise control from engaging. Finally, inspect the wiring connections associated with the cruise control system for any signs of damage or loose connections. By methodically following these steps, you can effectively diagnose and address the cruise control issue in your vehicle.

What are the common problems that could cause the cruise control to stop working in a 2020 Volvo XC60?

When troubleshooting the cruise control system in a 2020 Volvo XC60, it's essential to understand the common problems that may lead to its malfunction. One prevalent issue is a faulty speed sensor, which can disrupt the system's ability to accurately gauge the vehicle's speed, preventing it from engaging or maintaining the desired speed. Additionally, the brake light switch plays a crucial role; if it malfunctions, the cruise control may fail to activate or disengage properly when the brake pedal is pressed. Another potential culprit is the throttle control system, where a defective throttle position sensor or actuator can hinder the cruise control's performance. Electrical problems, such as blown fuses or wiring issues, can also impede the system's functionality, as can vacuum leaks in the engine, which affect the necessary vacuum pressure for proper operation. By identifying and addressing these common issues, DIY enthusiasts can effectively diagnose and resolve cruise control problems in their Volvo XC60.

How urgent is it to address the malfunctioning cruise control in a 2020 Volvo XC60?

When it comes to a malfunctioning cruise control in a 2020 Volvo XC60, the urgency of addressing the issue cannot be overstated. A faulty cruise control system can lead to erratic vehicle behavior, such as unexpected acceleration or deceleration, which poses significant safety risks on the road. Moreover, these issues may be symptomatic of deeper electronic or sensor malfunctions that could compromise the vehicle's overall performance. Ignoring these warning signs not only increases the likelihood of accidents but can also lead to higher fuel consumption and potential damage to other vehicle components, resulting in more costly repairs down the line. By taking immediate action to diagnose and fix cruise control problems, you not only enhance your safety but also protect your investment in the vehicle, ensuring it operates efficiently and reliably for years to come.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.