The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.
If the MAF sensor sends an erroneous signal, a few things happen. The engine's computer will trigger the check engine light, and the on-board diagnostic (OBD) trouble codes will reflect the airflow discrepancy noted by the MAF sensor. Depending on the reported volume of air, the engine may try to compensate for these conditions, causing the engine to burn excessive amounts of fuel and emit black smoke from the exhaust. In this case, the OBD trouble codes would also reference faults recognized by the exhaust oxygen sensors. The engine may also have issues with idling roughly, failing to start, stalling, hesitation, power loss, misfires, and fuel consumption.
A faulty oxygen sensor is one of the most common causes of a check engine light. Symptoms may include a decrease in fuel mileage, hesitation or misfiring from the engine, rough idling or even stalling. A faulty sensor may cause the vehicle to fail an emissions test.
Any time there is an emissions fault the check engine light will be displayed. The purpose of the check engine light is to inform the driver that an emission related fault has been found, and that there are on-board diagnostic (OBD) trouble codes stored in the powertrain or engine control module. Additionally, since the emissions systems are so intertwined into engine control and transmission control systems, symptoms may include nearly any sort of drivability concerns. This may include harsh shifting, failure to shift, hesitation on acceleration, jerking, engine failure to start or run, loss of power, or any number of other drivability issues.
When the Check Engine Light comes on, you may experience engine performance issues such as poor acceleration, rough idling, or an engine that won't start. In some cases, no abnormal symptoms will be experienced. Other systems like the transmission or ABS can cause the Check Engine Light to illuminate and lights for those systems can come on at the same time. Similar lights may say "Check Engine Soon", "Malfunction Indicator Light" or just "Check". In rare case the engine can overheat.
To effectively address a stalling issue in your 2017 Volvo S90, begin by checking for any warning lights on the dashboard, particularly the check engine light, as this can indicate underlying problems. Next, use an OBD-II scanner to retrieve error codes from the vehicle's computer, which will help you identify specific issues. After that, inspect the fuel system, including the fuel pump and filter, to ensure they are functioning correctly, as fuel delivery is crucial for engine performance. Following this, examine the ignition system components, such as spark plugs and ignition coils, to confirm they are providing the necessary spark. Additionally, test the battery and charging system to rule out electrical issues that could contribute to stalling. It’s also important to evaluate the air intake system for any clogs or leaks that may hinder airflow. Don’t forget to check various sensors, including the mass airflow and throttle position sensors, for proper operation, as they play a vital role in engine management. Lastly, inspect vacuum hoses for any leaks or damage and review the vehicle's maintenance history to identify any overdue services that could be related to the stalling issue. By following this structured diagnostic approach, you can systematically troubleshoot and resolve the stalling problem, ensuring your Volvo S90 runs smoothly.
When diagnosing engine stalling issues in a 2017 Volvo S90, it's essential to consider several common problems that could be at fault. A failing fuel pump is often a primary suspect, as it may not supply enough fuel to the engine, leading to stalling. If you notice a lack of power or difficulty starting, checking the fuel pump's functionality is a good first step. Additionally, the ignition system plays a crucial role; faulty spark plugs or a malfunctioning ignition coil can disrupt the combustion process, resulting in stalling. Inspecting these components for wear and replacing them as needed can often resolve the issue. Another critical area to examine is the airflow sensor, which regulates the air-fuel mixture. If this sensor is malfunctioning, it can cause the engine to stall due to an improper mixture. Cleaning or replacing the airflow sensor may restore proper function. The throttle body is also vital for maintaining a steady idle; if it’s dirty or malfunctioning, it can lead to stalling. Regular cleaning and inspection can help prevent this problem. Lastly, the Engine Control Module (ECM) oversees various engine functions, and any issues here can lead to stalling as well. If you suspect ECM problems, a diagnostic scan can help identify any error codes. By addressing these common issues through regular maintenance and timely repairs, you can significantly reduce the risk of engine stalling in your Volvo S90.
Addressing the engine stalling issue in a 2017 Volvo S90 is of utmost urgency due to the serious safety risks it poses. Engine stalling can lead to a sudden loss of power while driving, which not only endangers the driver and passengers but also increases the likelihood of accidents on the road. Ignoring these symptoms can exacerbate the problem, potentially resulting in more extensive damage to the vehicle's components and leading to costly repairs down the line. Therefore, it is crucial to consult with a qualified mechanic or reach out to a Volvo service center as soon as you notice any signs of stalling. Timely intervention not only ensures the safety and reliability of your vehicle but also helps prevent the risks associated with engine failure, making it essential to prioritize this issue without delay.
See what others are asking about their Volvo S90. Get answers from RepairPal's community of auto experts and enthusiasts.
Read about related problems experienced by other Volvo S90 drivers like you.