2015 Toyota Sienna Tire Pressure Light Won't Go Off (TPMS)

Addressing the Persistent TPMS Light in the 2015 Toyota Sienna

Find Repair Location
Reviewed by
Devin Cabugcal
Written by RepairPal Car Genius
Updated January 14, 2025
0%
40% chance it's the
Tire Leaking Air
0%
30% chance it's the
Wheel Leaking Air
0%
15% chance it's the
Tire Pressure Monitoring System
0%
15% chance it's
Something else
The most common reasons a 2015 Toyota Sienna tire pressure warning light stays on are a leaking tire, a wheel that no longer holds air, or a faulty tire pressure monitoring system.
  • Tire Leaking Air: A puncture, valve stem issue, or rim damage can cause a tire to leak air, leading to loss of pressure.
  • Wheel Leaking Air: A puncture or damage to the tire or rim can cause air to leak, resulting in a loss of tire pressure.
  • Tire Pressure Monitoring System: A malfunctioning tire pressure monitoring system can be caused by faulty sensors or a dead battery in the sensor units.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a 2015 Toyota Sienna tire pressure warning light stays on?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

When a tire pressure monitoring sensor fails, the tire pressure monitoring system control module will recognize a loss in communication and turn on the warning lamp which indicates the failure. This is most often the case. However, the tire pressure monitoring sensor may also fail by reporting incorrect tire pressures. This could cause a flat tire to go unrecognized, or a properly inflated tire to signal a low or high tire pressure warning.

When a relearn is needed, for any reason, the TPMS warning light will illuminate, and many vehicles will display a message relating to the TPMS system being inoperative or loosing communication. It is important to keep a watchful eye on tire pressures when this system is having issues because there is no warning available for underinflation or overinflation of the tires.

Wheels offer very few symptoms, but these symptoms should never be ignored. Visible cracks on the wheels may appear, especially after hitting a large bump, Most often, this will also be accompanied by loss of air from the tire on that wheel. Also, vibration in the steering wheel is very common when the tire is out of balance, and improper wheel nuts or bolts can cause creaking and popping noises to develop. Again, there are very few symptoms, but they should not be ignored.

The only symptoms of a TPMS control module failure are failing to alert the driver of underinflation or overinflation of one or more tires, failure to communicate with the body control module or TPMS sensors, or erroneously reporting incorrect tire pressure.

The only symptoms requiring diagnosis for the tire pressure monitoring system warning lamp is if the warning lamp has illuminated while the tires have correct air pressure, or if the air pressure for the tires is out of specification and the warning lamp is off. This is because the overwhelming majority of cases where the TPMS lamp illuminates is due to the change in ambient temperature.

What steps should I take to diagnose the tire pressure light issue on my 2015 Toyota Sienna?

To effectively diagnose the tire pressure light issue on your 2015 Toyota Sienna, begin by checking the tire pressure in all four tires, ensuring they are inflated to the recommended levels specified in your owner's manual or on the tire information placard located on the driver's side doorjamb. This initial step is crucial, as incorrect tire pressure is often the primary cause of the warning light. After confirming the pressure, use a tire pressure gauge to verify that the readings are accurate, making sure to check the tires when they are cold for the most reliable results. If the pressure is correct but the light remains illuminated, proceed to reset the Tire Pressure Monitoring System (TPMS) by turning the key to the "on" position without starting the engine, locating the TPMS reset button, and holding it until the light flashes and turns off. In cases where you have recently changed or rotated your tires, or installed new TPMS sensors, you may need to register these sensors with the vehicle's ECU using an OBDII module and a TPMS activation tool. If the light persists after these steps, it may indicate a malfunction with one of the TPMS sensors, which can be diagnosed using a TPMS scan tool to retrieve any Diagnostic Trouble Codes (DTCs). Should these DIY methods fail to resolve the issue, consulting a professional mechanic or a Toyota dealership is advisable, as they possess the advanced tools necessary for diagnosing more complex problems within the TPMS system. By following this structured approach, you can effectively troubleshoot and potentially resolve the tire pressure light issue on your Sienna.

What could be causing the tire pressure light to stay on in a 2015 Toyota Sienna?

When the tire pressure light remains illuminated on your 2015 Toyota Sienna, it’s essential to understand the common problems that could be causing this issue. One of the primary reasons is low tire pressure, which can occur if one or more tires are underinflated, typically falling below 75% of the recommended pressure. This situation can lead to decreased fuel efficiency and compromised safety, so checking and inflating your tires to the correct pressure is a crucial first step. If the light initially blinks before turning solid, it may indicate a malfunction in the Tire Pressure Monitoring System (TPMS). This could be due to a dead battery in one of the TPMS sensors, which are usually located in the valve stems and have a lifespan of about 5-10 years. If you suspect a sensor failure, you can have the sensors tested at a tire shop without removing the tires. Additionally, sometimes the TPMS may not reset properly after adjusting tire pressures. To resolve this, ensure your tires are inflated correctly and use the TPMS reset button. If the light persists after these steps, it may be time to consider replacing a faulty sensor. By understanding these common problems, you can effectively troubleshoot and address the tire pressure light issue in your Sienna, ensuring a safer driving experience.

What should I do if the tire pressure light on my 2015 Toyota Sienna won't turn off?

If the tire pressure light on your 2015 Toyota Sienna remains illuminated, it’s crucial to address the issue without delay. Ignoring this warning can lead to unsafe driving conditions, such as reduced traction and increased tire wear, which may ultimately result in a blowout or loss of control while driving. Start by checking the tire pressure in all four tires to ensure they are inflated to the recommended levels, as under-inflation is a common cause for the light to activate. If the pressures are correct, proceed to reset the Tire Pressure Monitoring System (TPMS) to see if the light turns off. Driving the vehicle at a speed of at least 25 mph for a few minutes after resetting can help the system recalibrate. If the light persists, it may indicate a malfunctioning TPMS sensor or other underlying issues that could compromise your safety. Therefore, it’s advisable to have the sensors checked or consult a professional mechanic if the problem continues. Taking these steps not only ensures your safety on the road but also helps prevent further damage to your vehicle.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.