2014 Subaru Legacy Window Won't Go Up Or Down

Common Causes of Window Malfunctions in Your 2014 Subaru Legacy and How to Fix Them

Find Repair Location
Reviewed by
Devin Cabugcal
Written by RepairPal Car Genius
Updated January 14, 2025
0%
36% chance it's the
Fuse, Relay or Electrical System
0%
20% chance it's the
Window Motor
0%
24% chance it's the
Window Regulator
0%
20% chance it's
Something else
The most common reasons a 2014 Subaru Legacy window won't go up or down are window's electrical system such as a fuse or relay, a broken window motor, or a broken window regulator.
  • Fuse, Relay or Electrical System: A blown fuse or a faulty relay can disrupt the electrical circuit, causing components to malfunction or not operate at all.
  • Window Motor: A faulty window motor or a broken window regulator can prevent the window from moving up or down properly.
  • Window Regulator: A faulty window regulator can cause the window to become stuck or operate erratically due to worn gears or a broken cable.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a 2014 Subaru Legacy window won't go up or down?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

Due to the nature of electrical systems on modern vehicles, the range of problems these can cause are nearly limitless. However, there is a way to categorize them in two ways. Permanent and intermittent problems. Permanent problems appear and remain. This may be the vehicle will not start, the radio does not work, or the door chime will not turn off among many, many others. These problems are more straight-forward to diagnose since they present themselves at all time. This means there will always be a fault to find. Intermittent electrical problems, however, can be difficult or impossible to locate, since they appear then disappear without warning. The best case scenario for an intermittent issue is when replicating the problem is easily accomplished and understood. This allows a technician to make an issue semi-permanent, allowing them to find the fault. Other issues that come and go without warning and cannot be replicated on demand must occur when the technician is servicing the vehicle, otherwise there is no problem to correct. It is most important to understand that electrical system faults always require inspection, and can include the vehicle working in any manner, or not working at all.

Like we noted in the last section, general diagnosis symptoms are the most vague of the bunch. There are several diagnostic spectrums, electrical diagnosis, drivability diagnostics, engine diagnostics, transmission diagnostics, and the list could continue for about 5 or 10 more spectrums of diagnostics. The most important take-away here, is that general diagnostics are diagnostics that have no other spectrum in which they fit, or the problem is unknown. This means that any vehicle left outside of a repair facility with the keys and an authorization to perform diagnosis will be diagnosed under the general diagnosis spectrum.

What are the steps to diagnose a non-functioning window in a 2014 Subaru Legacy?

To effectively diagnose a non-functioning window in a 2014 Subaru Legacy, start with the simplest solutions before moving on to more complex issues. Begin by checking the power window switch, as a malfunction here can prevent the window from operating. If the switch appears functional, listen for any clicking sounds when you press the button; this could indicate that the window motor is attempting to work but is hindered. Next, verify that the lock-out switch is not engaged, as this feature can disable the window controls. If these initial checks do not resolve the issue, inspect the window motor and regulator for any signs of failure or binding, which may require replacement. Additionally, examine the run channel for any obstructions caused by the weather strip, as this can also impede window movement. Lastly, ensure that there are no blown fuses in the power window circuit, as this is a common and easily fixable problem. If the window still does not function after these steps, consulting a Subaru technician may be necessary for a thorough diagnosis and repair. By following this structured approach, you can efficiently identify and address the problem with your vehicle's window.

How urgent is it to address the malfunctioning window in my 2014 Subaru Legacy?

Addressing a malfunctioning window in your 2014 Subaru Legacy is not just a matter of convenience; it is a critical safety concern that requires immediate attention. A faulty window can hinder your ability to escape in emergencies, posing serious risks during critical situations. Additionally, a malfunctioning window compromises your vehicle's security, making it more susceptible to theft or unauthorized access. Ignoring the issue can lead to further damage, such as affecting the window regulator or motor, which may escalate repair costs significantly. Moreover, if the window does not seal properly, it can expose your vehicle's interior to harsh weather conditions, leading to potential damage from rain or snow. By addressing the malfunction promptly, you not only enhance your safety and security but also prevent additional complications that could arise from neglecting the issue. Therefore, it is essential to prioritize repairs to ensure the overall well-being of your Subaru Legacy.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.