The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.
When a tire pressure monitoring sensor fails, the tire pressure monitoring system control module will recognize a loss in communication and turn on the warning lamp which indicates the failure. This is most often the case. However, the tire pressure monitoring sensor may also fail by reporting incorrect tire pressures. This could cause a flat tire to go unrecognized, or a properly inflated tire to signal a low or high tire pressure warning.
When a relearn is needed, for any reason, the TPMS warning light will illuminate, and many vehicles will display a message relating to the TPMS system being inoperative or loosing communication. It is important to keep a watchful eye on tire pressures when this system is having issues because there is no warning available for underinflation or overinflation of the tires.
Wheels offer very few symptoms, but these symptoms should never be ignored. Visible cracks on the wheels may appear, especially after hitting a large bump, Most often, this will also be accompanied by loss of air from the tire on that wheel. Also, vibration in the steering wheel is very common when the tire is out of balance, and improper wheel nuts or bolts can cause creaking and popping noises to develop. Again, there are very few symptoms, but they should not be ignored.
The only symptoms requiring diagnosis for the tire pressure monitoring system warning lamp is if the warning lamp has illuminated while the tires have correct air pressure, or if the air pressure for the tires is out of specification and the warning lamp is off. This is because the overwhelming majority of cases where the TPMS lamp illuminates is due to the change in ambient temperature.
To effectively diagnose the tire pressure warning light issue in your 2018 Ram 2500, begin with the simplest and most straightforward step: checking the tire pressure in all four tires. Utilize a reliable tire pressure gauge to ensure that each tire is inflated to the recommended PSI, which can be found in your owner's manual or on the sticker located on the driver's side door jamb. If you discover that any tire is under-inflated, use a tire inflator to bring it up to the correct pressure. Next, inspect the tires for any visible damage, such as punctures, cuts, or bulges, as these can lead to air loss. Don’t forget to examine the valve stems for any signs of leaks or damage, as faulty valve stems can also contribute to pressure issues. After addressing any low pressure and ensuring the tires are in good condition, you may need to reset the Tire Pressure Monitoring System (TPMS) using the reset button in your vehicle. Finally, keep an eye on the tire pressure warning light; if it remains illuminated after these steps, it may indicate a more serious problem that requires professional attention. By following this diagnostic approach, you can efficiently troubleshoot and resolve the tire pressure warning light issue on your own.
When the tire pressure warning light stays on in a 2018 Ram 2500, it can be indicative of several common problems that DIY enthusiasts can troubleshoot. The most frequent issue is low tire pressure, which can be easily checked and corrected by inflating the tires to the recommended levels. If the tire pressure is adequate, the problem may stem from the tire pressure sensors. A faulty sensor or a depleted battery can lead to persistent warning lights, and these components may require replacement or recalibration. Additionally, electrical issues, such as wiring faults or a malfunctioning control module, can also cause the warning light to remain illuminated. By systematically inspecting the tires and the vehicle's electrical system, you can effectively diagnose and resolve the issue, ensuring both your safety and the proper functioning of your vehicle.
Addressing the tire pressure warning light on your 2018 Ram 2500 is not just a matter of convenience; it is a critical safety concern that requires immediate attention. Ignoring this warning can lead to dangerous driving conditions, as underinflated tires significantly compromise your vehicle's handling and braking capabilities. This can result in a loss of control, especially in adverse weather conditions. Furthermore, driving on tires with insufficient pressure accelerates uneven wear, which not only shortens the lifespan of your tires but also negatively impacts fuel efficiency, costing you more in the long run. The risk of tire damage, including blowouts or flats, increases with continued operation under these conditions, particularly at higher speeds. The Tire Pressure Monitoring System (TPMS) is designed to alert you to these issues, serving as an early warning system to prevent further complications. Therefore, it is essential to take the tire pressure warning light seriously and address it promptly to ensure your safety and the optimal performance of your vehicle.
See what others are asking about their Ram 2500. Get answers from RepairPal's community of auto experts and enthusiasts.
Read about related problems experienced by other Ram 2500 drivers like you.
