Ram 2500 Repair and Maintenance
A guide to problems, costs, maintenance and repair for your Ram 2500
- Pcm erased, when another program inserted now truck does nothing, what to do?
- Are these trucking having a lot of mechanical issues
- dash board shuts down
- Brake pedal as being depressed there is a slight bump feeling in the pedal.
- 2 issues, P2BAC code...what is it? Exhaust Service Required-see dealer now?
Ram 2500 Questions
at about 30K mile a squeel started like it might be the brake pad indicators, but it has just gotton worse as far as noise, but now there is a slight bump in the pedal when its depressed. could sure use some help if anyone has a clue.
My ram is 2500 diesel year model 2011
Ram 2500 Recalls
Vehicles equipped with a diesel engine have an electric fuel heater. The electrical connectors may overheat. If the connectors overheat, the fuel heater may leak fuel, increasing the risk of a fire. Dealers will replace the harness side connector with a silver plated beryllium copper terminal service kit, and inspect the fuel heater for leaks, replacing it as necessary.
The left and right tie rod assemblies are part of the front steering linkage, Certain trucks are being recalled because the left tie rod can break unexpectedly. This can result in loss of steering control. Dealers will inspect the steering linkage and install a new left tie rod assembly as necessary to correct this concern. This recall supersedes a previous recall, some vehicles repaired under the first recall may require an additional repair.
If there is a problem with the turn signal system the signal indicator on the dash should flash at double its normal rate. These 2013 Ram trucks are being recalled because this may not occur and the driver could unknowingly continue to use the turn signals believing the system was operating normally. Dealers will reprogram the Central Body Controller software to correct this concern.