What is your question?
I put the key in, push the clutch to the floor, turn the key to the start and it sometimes does nothing. After several tries it may start up fine. The starter turns fine. Is this an ignition problem, clutch swith, or solenoid? Truck only has 49,000 0n it.
1 Reply
Sounds like the clutch switch; Try turning to start, transmission in neutral and brake on, then move the clutch all the way to the bottom and up slightly and see if there is a good spot to work with until you get it changed.
got the same problem i even put jumper on starter to bypass newtral safty still woent start will crank with power on no start