This info is available from http://bit.ly/autozone_repair_info under repair guides
* TRANSAXLE REMOVAL & INSTALLATION
Continental 2000-2002
Transaxle Removal & Installation
NOTE
Disable the air suspension before raising the vehicle. The switch is located on the left side of the luggage compartment.
1. Before servicing the vehicle, refer to the Precautions section.
2. Turn the air suspension switch to the OFF position.
3. Attach a powertrain support fixture to the engine lifting eyes.
4. Drain the transaxle fluid.
5. Remove or disconnect the following:
Battery and battery tray
Intake Air Temperature (IAT) sensor connector
Mass Air Flow (MAF) sensor connector
Air cleaner assembly
Transaxle control harness connector
Transaxle range sensor
Turbine shaft speed sensor connector
Shift cable
Transaxle oil cooler lines
Front wheels
Suspension height sensors
Wheel speed sensors
Outer tie rod ends
Lower ball joints
Stabilizer bar links
Halfshafts
Heated Oxygen (HO 2 S) sensor connectors
Dual converter Y-pipe
Starter
Left, right and rear engine support insulators
Subframe
Transaxle housing cover
Torque converter
Transaxle flange bolts
6. Separate the transaxle from the engine and lower it from the vehicle
