What is your question?
·
·
What is your question?
new wires, spark plugs, fuel filter and did a compression check all good. no codes but 4$3 plugs is black compare to 2&1 look to be pretty good and real slow about picking up speed converter have remove.Please help
1 Reply
were the plug wells full of oil when you changed them?have you tried to clean the iac valve,the screen on it gets stopped up with black carbon.the new plugs on 3 and 4 are black now?what brand of spark plugs are you using,NGK i hope?what was the gap on the plugs?
Yes the plug wells was i replace the valve cover gasket but i didn't clean the iac. used NKG plugs but I did not gap them. I'ii go back an gap plugs,clean iac. Thank you and anything else please let me know I'll do it.
some plugs you don't gap.if you used ngk they should be gapped already,should be .044.if they are close to .044 don't re-gap.also did you replace the spark plug tube seals in the valve cove?cause if you didn't,the plug wells will fill up with oil again.how did you get the oil out of the plug wells before replacing the plugs?or did you let the oil drain down on the pistons.also have you checked the pcv valve?do you have any vacuum leaks?