What is your question?
·
·
What is your question?
we removed the inline to see if that was why it did not run we then filter turnd the key on and no fuel was comming from the tank. does that mean its the fuel pump?
we did that 1st thing its not the cut off switch
This is how it's done! .... Check for battery voltage at the inertia switch two wire connector when key is turned on... Should have voltage on both wires 'as' the key is turned on... If no power... possible fuse or relay problem... IF voltage IS present on BOTH wires... *Suspect pump failure*... may need some hands-on help with testing... Voltage will only be present for a few seconds when key is turned on.. Have voltage tester (volt meter OR test light) in place, then turn key on!.. Good luck, let us know how it turns out.