how to change fuel pump.

Remove the fuel pump relay from the fuse and relay box in the engine bay. Check the diagram below the cover of the box for the location of the relay.start the engine,it should cut off.try starting again to relieve fuel pressure.Remove the negative battery terminal nut with the wrench. Lift off the negative cable and set it aside. open the trunk and take out the carpet to reveal the fuel pump access panel. Remove the four screws securing the panel to the trunk. Pull off the panel. Disconnect the EVAP, return line and electrical connector on the fuel pump. Spray the pump and area around it with compressed air to clean off any debris or particulate that could contaminate the gas tank. Release the retaining ring by hitting the tabs with the screwdriver and hammer. Pull off the ring. Lift out the pump and pump O-ring. Lubricate the O-ring of the new fuel pump. Set it on the gas tank opening just like the old one came out. Insert the fuel pump. Secure it there with the retaining ring. Attach the EVAP, fuel return line and electrical connector to the new fuel pump. Reconnect the battery cable and fuel pump relay. Prime the fuel system by turning on the ignition several times until the engine cranks. Check for gas leaks. Retighten any leaky fittings.