What is your question?
·
·
What is your question?
I had the codes checked and it can up with P0700 and P1775; Something to do with the transfer case and a solenoid that controls first gear; Any ideas what my problem may be?
1 Reply
This condition has nothing to do with the Transfer Case. This is a Transmission or controller issue. P0700-TRANSMISSION CONTROL SYSTEM (MIL REQUEST) ; WHEN MONITORED Ignition on and battery voltage greater than 10 volts . SET CONDITION ; An active DTC is stored in the TCM. One Trip Fault. Three good trips to turn off the MIL. POSSIBLE CAUSES; DTC Present In The Transmission Control Module. P1775-SOLENOID SWITCH VALVE LATCHED IN TCC POSITION . Set Condition: Transmission temperature must be hot. DTC is set after six unsuccessful attempts to shift into 1st gear. Possible Causes RELATED DTC P0841 PRESENT (T16) TRANSMISSION CONTROL RELAY OUTPUT CIRCUIT OPEN (T50) L/R PRESSURE SWITCH SENSE CIRCUIT OPEN (T50) L/R PRESSURE SWITCH SENSE CIRCUIT SHORT TO GROUND (T50) L/R PRESSURE SWITCH SENSE CIRCUIT SHORT TO VOLTAGE INTERNAL TRANSMISSION POWERTRAIN CONTROL MODULE