The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.
When the throttle position sensor fails, the engine's computer tends to overcompensate with fuel, leading black exhaust coming from the tailpipe. There is a strong possibility of engine misfires, and the check engine light will come on.
Throttle position sensors can also develop "dead spots," or certain places along the throttle curve where it doesn't get a reading. When this happens, the above symptoms can occur but then stop when you further press or let off the gas pedal.
When the vehicle speed sensor fails or the wiring harness prevents signal transmission, the speedometer is the first thing that will stop functioning properly. This can be an intermittent issue where the speedometer only works occasionally, the speedometer may cease all function, or the speedometer may read erratically or incorrectly. Also, the traction control and anti lock brake warning lights specific to each vehicle may be illuminated, depending on the design of those systems. You may notice the vehicle hesitate to accelerate, cruise control will not function properly, and the vehicle may not shift properly through all of the gears.
In the event that a wheel speed sensor fails, the ABS, traction control system (TCS) and manufacturer specific stability control system lights will illuminate, informing the driver that the systems are disabled. The vehicle will be more prone to tire slip, and normal driving patterns may need to be adjusted to correct for the loss of computer control. On older vehicle's, the speedometer can be affected, causing illumination of the check engine light as well.
If the cruise control refuses to turn on at all, the actuator could be at fault. Likewise, if the cruise control stays on but does not maintain a consistent speed, the problem could be a bad actuator. In extreme cases, a malfunctioning actuator could cause the throttle to stick and prevent the vehicle from slowing down. These symptoms may point to a bad actuator. They may also point to other problems with the cruise control and related systems.
The cruise control switch can cause complete failure of the cruise control feature, but in a lucky scenario only partial functionality will be lost. This means that the cruise control may come on, but that it will not increase in speed automatically, or the cancel button does not work leading the driver to cancel cruise control with the foot brake. In some vehicles, the cruise control light may illuminate, or a warning message may be displayed due to lack of functionality.
A faulty cruise control module will simply result in deactivation of cruise control settings. This is because a detected error in the cruise control system could lead to hazardous driving conditions, so the module will be disabled, and the cruise control system warning light will be displayed. This will be a different message depending on make and model, and a warning light or message may be displayed on the driver instrument cluster.
When troubleshooting cruise control issues in a Mitsubishi Montero, it's essential to adopt a systematic diagnostic approach. Begin by inspecting the most accessible components, such as the control module, sensors, and switches, as these are often the culprits behind malfunctions. Next, check the throttle to ensure it operates smoothly, as any irregularities can directly impact cruise control functionality. Utilizing a diagnostic tool to scan for error codes can provide valuable insights into underlying problems. After addressing these initial checks, turn your attention to the vacuum lines; any cracks or damage here can disrupt the system's operation. Additionally, verify the integrity of the cruise control fuse, as a blown fuse can halt functionality entirely. Don’t overlook the brake pedal switch, which plays a crucial role in the system's operation; ensure it is functioning correctly to prevent unintended disengagement. Lastly, if aftermarket LED lights have been installed, assess their impact on the cruise control circuit, as they can sometimes interfere with the system. By following this structured approach, you can effectively diagnose and resolve cruise control issues in your Mitsubishi Montero, ensuring a smoother driving experience.
When troubleshooting cruise control issues in a Mitsubishi Montero, it's essential to understand the common problems that may arise within the system. Start by examining the control module, sensor, and switch, as failures in these components are frequent culprits behind cruise control malfunctions. Additionally, inspect the throttle actuation system, since any issues here can disrupt the cruise control's functionality. The throttle position sensor is another critical element; if it fails, it can lead to improper fuel management, which may manifest as black exhaust. Don't forget to check the cruise control fuse, as a blown fuse can completely disable the system. The brake pedal switch is also vital, as a malfunction can prevent the cruise control from engaging or cause it to disengage unexpectedly when the brakes are applied. Lastly, ensure that the cruise control module is receiving adequate power, as any interruption in the power supply can hinder its operation. By methodically assessing these components, you can effectively diagnose and potentially resolve the cruise control issues in your Mitsubishi Montero.
When your Mitsubishi Montero's cruise control stops functioning, it’s crucial to understand the potential causes and the urgency of addressing them. Common issues include failures in the control module, sensors, or switches, which can disrupt the system's operation. Additionally, throttle actuation problems and a malfunctioning throttle position sensor can lead to erratic engine behavior, such as excessive fuel consumption and black exhaust, indicating a need for immediate attention. Furthermore, problems with the brake pedal switch or a blown fuse can also prevent the cruise control from engaging, posing safety risks during driving. It's important to note that using LED lights in the tail or stop lights may interfere with the cruise control circuit, as it relies on the brake light system for disengagement. Neglecting these symptoms not only compromises your driving experience but can also lead to more significant vehicle damage or safety hazards, making it essential to troubleshoot and resolve these issues promptly.
Read about related problems experienced by other Mitsubishi Montero drivers like you.
See what others are asking about their Mitsubishi Montero. Get answers from RepairPal's community of auto experts and enthusiasts.