2007 Lincoln Navigator Cruise Control Isn't Working

Common Causes of Cruise Control Malfunctions in Your 2007 Lincoln Navigator and How to Fix Them

Find Repair Location
Reviewed by
Bo Fader
Written by RepairPal Car Genius
Updated January 14, 2025
0%
30% chance it's the
Sensor
0%
25% chance it's the
Control Module
0%
25% chance it's the
Throttle
0%
20% chance it's
Something else
The most common reasons a 2007 Lincoln Navigator cruise control isn't working are failed control module, sensor or switch issues, or throttle actuation problems.
  • Sensor: A faulty or malfunctioning sensor can lead to incorrect readings, causing issues with engine performance or other systems relying on accurate data.
  • Control Module: A faulty control module can lead to erratic vehicle behavior or failure of various electronic systems due to improper signal processing.
  • Throttle: A faulty throttle body or a defective accelerator pedal position sensor may be causing inconsistent throttle response.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a 2007 Lincoln Navigator cruise control isn't working?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

When the throttle position sensor fails, the engine's computer tends to overcompensate with fuel, leading black exhaust coming from the tailpipe. There is a strong possibility of engine misfires, and the check engine light will come on.

Throttle position sensors can also develop "dead spots," or certain places along the throttle curve where it doesn't get a reading. When this happens, the above symptoms can occur but then stop when you further press or let off the gas pedal.

In the event that a wheel speed sensor fails, the ABS, traction control system (TCS) and manufacturer specific stability control system lights will illuminate, informing the driver that the systems are disabled. The vehicle will be more prone to tire slip, and normal driving patterns may need to be adjusted to correct for the loss of computer control. On older vehicle's, the speedometer can be affected, causing illumination of the check engine light as well.

The cruise control switch can cause complete failure of the cruise control feature, but in a lucky scenario only partial functionality will be lost. This means that the cruise control may come on, but that it will not increase in speed automatically, or the cancel button does not work leading the driver to cancel cruise control with the foot brake. In some vehicles, the cruise control light may illuminate, or a warning message may be displayed due to lack of functionality.

What are the initial diagnostic steps to troubleshoot the non-functional cruise control in a 2007 Lincoln Navigator?

When troubleshooting the non-functional cruise control in a 2007 Lincoln Navigator, it's essential to adopt a systematic diagnostic approach. Begin by checking the cruise control fuse located in the fuse box, as a blown fuse can easily disrupt the system's operation. Next, inspect the cruise control buttons on the steering wheel to ensure they are not stuck or damaged, as this can prevent engagement. It's also crucial to verify that the brake lights are functioning correctly; a faulty brake light switch can inhibit cruise control activation. If these initial checks do not resolve the issue, consider using a diagnostic scanner to identify any error codes that may indicate underlying problems. Additionally, examine the vehicle speed sensor, as it is vital for the cruise control system's functionality. Inspecting the vacuum lines for leaks or damage is another important step, as these can affect the system's performance. Finally, test the cruise control module to ensure it is sending signals properly. If the cruise control remains non-functional after these steps, seeking assistance from a professional mechanic may be necessary for further diagnosis and repair. By following this structured approach, you can effectively identify and address the common issues that may be affecting your vehicle's cruise control system.

What are the common problems that could cause the cruise control to stop working in a 2007 Lincoln Navigator?

When troubleshooting the cruise control system in a 2007 Lincoln Navigator, it's essential to consider several common problems that could be at play. One of the primary culprits is a faulty brake pedal switch, which is designed to disengage the cruise control when the brake is applied; if this switch malfunctions, it can prevent the system from engaging. Additionally, issues with the speed sensor can disrupt the cruise control's ability to maintain a steady speed, leading to failure. It's also wise to check for a blown fuse in the cruise control circuit, as this can easily interrupt functionality. Another potential issue is vacuum leaks within the engine, which can hinder the system's performance. If these components check out, the cruise control module itself may be defective and require replacement. Lastly, inspect the electrical connections for any signs of damage or corrosion, as these can also impede the system's operation. By systematically addressing these areas, you can effectively diagnose and potentially resolve the cruise control issues in your Navigator.

How urgent is it to repair the non-functioning cruise control in a 2007 Lincoln Navigator?

When assessing the urgency of repairing the non-functioning cruise control in a 2007 Lincoln Navigator, it's essential to weigh the convenience of this feature against your driving habits and the potential for underlying mechanical or electrical issues. While the lack of cruise control may not pose an immediate safety risk, it can lead to increased driver fatigue during long trips, making it a significant comfort concern for frequent highway travelers. Additionally, neglecting this repair could mask more serious problems that might affect other vehicle systems, potentially leading to more costly repairs in the future. Therefore, if you often find yourself on long drives, addressing the cruise control issue sooner rather than later can enhance your driving experience and prevent further complications. Conversely, if your driving is primarily limited to short city trips, the urgency may be less pressing, allowing you to prioritize this repair based on your specific needs and comfort preferences.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.