The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.
Inability to control the windshield wipers comes in several forms, and they are all indicative of windshield wiper switch failure. The windshield wipers may not work in all settings, may not turn on when requested, may not move to their parked position when turning off, or the washer pumps may or may not run at random. This is a general list of symptoms, but failure of anything the windshield wiper switch controls will indicate the need for testing the windshield wiper and washer switch.
To effectively diagnose the non-functioning windshield wipers on your 2012 Kia Sorento, start with the simplest solutions before progressing to more complex issues. Begin by checking the pivot nut to ensure it is securely fastened, as a loose nut can prevent the wiper blades from operating correctly. If the wipers remain inactive, inspect the wiper motor for signs of failure, such as humming noises or erratic movement. Next, examine the wiper relay, as a malfunctioning relay can cause the wipers to operate at a single speed or not at all. Don’t forget to check the fuses; a blown fuse is a common culprit for wiper issues and can be easily replaced. If these components are functioning properly, look into the condition of the wiper arms and mounting blocks, as worn parts can lead to jamming or ineffective wiping. By systematically addressing these areas, you can identify and resolve the problem, restoring your windshield wipers to full functionality.
Addressing the issue of non-functioning windshield wipers on your 2012 Kia Sorento is not just a matter of convenience; it is a critical safety concern that should be prioritized. When wipers fail to operate, visibility can be severely compromised, particularly during rain or snow, which can lead to dangerous driving conditions. The urgency to fix this problem stems from the fact that various factors, such as a blown fuse, a faulty motor, or even extreme weather conditions, can contribute to wiper malfunction. Ignoring these symptoms can escalate the risk of accidents, as reduced visibility makes it difficult to navigate the road safely. Moreover, if debris accumulates on your windshield, it can further impair your ability to see clearly, increasing the likelihood of a collision. Therefore, it is essential to address any issues with your windshield wipers as soon as they arise to ensure not only your safety but also the safety of others on the road.
A failed windshield wiper motor will do one of two things in the event of failure. First, it can intermittently work, meaning when the wiper switch is turned on, the windshield wipers may activate, and run for a random amount of time. This may happen at random, or change with a bump. Lastly, the windshield wipers could show no signs of activity, indicating motor failure.
The moment water touches the windshield, you know if you need new windshield wiper blades. If your wiper blades are torn, cracked, hard, or brittle, it is time for replacement. Wipers should also be replaced if the wiper blades only smear water around, seem to make a mess, streak the windshield, and miss large patches. If you are unhappy with the current wiper blades on your vehicle, this is a very economical change to make.
Windshield wiper arms will be replaced mainly for aesthetic reasons or damage. If the windshield arms become bent or rusted, the windshield wipers may not contact the windshield at the proper angle, or there may be no contact at all. Also, the sun will take a toll on these parts after years of use, and fading or clear coat peeling will result, not to mention rust.
See what others are asking about their Kia Sorento. Get answers from RepairPal's community of auto experts and enthusiasts.
Read about related problems experienced by other Kia Sorento drivers like you.