The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.
When the head gasket begins to fail, the engine may have no symptoms at all. They only begin to occur when the leak has reached an engine oil passage, engine coolant passage or the engine cylinder.
When that happens, the engine may be very difficult to start, and run roughly when idling. There may be oil or coolant leaking, and the engine may begin to overheat, or at least run hot. At this point, there may be coolant in the engine oil pan — this will look creamy and lighter in color than the oil. Also, the radiator or engine coolant reservoir may have a gurgling sound, the presence engine oil, or smell of combustion. And the check engine light will come on.
The coolant being burned in the engine will produce white exhaust that smells sweet, like engine coolant. When the head gasket fails completely, the engine will overheat within minutes of starting, will stall and then won't restart.
A failing heater core may cause the car's interior to smell like engine coolant. The smell will become worse when the heater is turned on. The engine may also begin to run hotter until the vehicle is repaired.
The worst-case scenario is the engine overheating, which can cause extensive engine damage.
If the heater core is clogged, the air that blows when the heater is turned on will not be very hot.
Problems with the intake manifold gasket can create the following symptoms:
» LEARN MORE: Intake manifold gasket symptoms
A failing radiator can cause the engine to run hot or overheat. Most radiators are made of metal and plastic. The plastic parts can become brittle and crack over time, causing a leak of coolant (typically green or pink in color). All manufacturers have a recommended service interval for coolant renewal. As the coolant ages, the additives breakdown and being to form solid deposits. These deposits will build up in the passages of the cooling system and will eventually clog components, including the radiator. A leaking or clogged radiator must be replaced. Some automatic transmission cars will also have a transmission cooler integrated into the radiator. Lines going to and from the transmission circulate transmission fluid to help cool the transmission in heavy duty applications such as towing or off-roading. If this integrated cooler fails, it can allow transmission fluid and coolant to mix. This will causing shifting issues in addition to overheating.
A coolant leak may be noted from the hoses. Coolant hoses can be damaged by oil leaks, or age. This will lead to swelling or cracking, it is suggested to replace the hoses before they begin leaking to avoid potential overheating.
The bad thermostat can cause two different sets of problems, depending on whether it's stuck open or stuck closed.
A thermostat that is stuck open can cause the engine to run colder than normal and turn on the check engine light. It may also cause poor fuel mileage and the heater to blow cool air.
A thermostat that is stuck closed will cause the vehicle to overheat. If a new thermostat doesn't resolve engine temperature problems, the cooling system needs to be checked for other issues.
» LEARN MORE: Signs of a bad thermostat, and how to fix it
If a vehicle is overheating, a bad thermostat could be the problem, and a damaged thermostat housing is more likely to produce a coolant leak, either from a cracked or warped housing or a failed seal to the engine. The thermostat housing can be made of metal or plastic. And the housing can be a stand-alone part that is separate from the thermostat, or (on later model vehicles) can be integrated with the thermostat and replaced as a single unit.
The two most common signs of a bad pump are leaks and noises.
Leaking water pumps can result in damage to the drive and timing belts, and cause the engine to overheat. A failed water pump can be caused by other problems in the cooling system, such as a bad thermostat, radiator or head gasket.
To effectively diagnose a coolant leak in your 2016 Jeep Grand Cherokee, start with a thorough visual inspection of the vehicle. Look for any visible signs of coolant pooling under the car or around critical components such as the radiator, hoses, and water pump. If you don’t spot any obvious leaks, consider using a cooling system pressure tester, which can help identify hidden leaks by pressurizing the system. Regularly checking your coolant levels is also essential; a consistent drop in levels can indicate a leak. Pay close attention to the condition of the radiator and hoses, looking for cracks or bulges that may suggest damage. Additionally, inspect the heater core and water pump for any signs of leakage. Finally, be aware of any unusual sweet smells or white smoke from the engine bay, as these can be telltale signs of a coolant leak. By following this systematic approach, you can effectively pinpoint the source of the leak and take the necessary steps to address it.
When dealing with coolant leaks in a 2016 Jeep Grand Cherokee, it's essential to understand the common problems that may arise. A damaged radiator is often a primary culprit, as corrosion or physical damage can lead to significant leaks. Additionally, worn-out hoses are another frequent issue; over time, the rubber can degrade, resulting in cracks or holes that allow coolant to escape. The water pump, responsible for circulating coolant throughout the engine, can also fail, leading to leaks if it malfunctions. Furthermore, loose or damaged hose clamps may fail to create a proper seal, exacerbating the problem. In more severe cases, a cracked engine block can cause coolant to leak, which is a critical issue that requires immediate attention. Lastly, a leaking heater core can introduce coolant into the vehicle's interior, creating both a mess and potential safety hazards. By being aware of these common causes, DIYers can better diagnose and address coolant leaks, ensuring their Jeep remains in optimal condition.
Addressing a coolant leak in your 2016 Jeep Grand Cherokee is not just a matter of convenience; it is a critical safety concern that demands immediate attention. Coolant plays a vital role in maintaining optimal engine temperature, and a leak can quickly lead to overheating, which poses a significant risk of severe engine damage. If left unchecked, the engine may run excessively hot, leading to catastrophic failures that could result in costly repairs or even complete engine replacement. Additionally, a coolant leak can deplete your vehicle's coolant levels, increasing the likelihood of overheating and potentially causing the engine to seize while driving. This not only jeopardizes the vehicle's performance but also compromises your safety on the road. Furthermore, neglecting a coolant leak can adversely affect fuel efficiency, leading to higher operational costs. Therefore, it is imperative to inspect and repair any coolant leaks as soon as they are detected to ensure the safe and efficient operation of your Jeep Grand Cherokee.
Read about related problems experienced by other Jeep Grand Cherokee drivers like you.
See what others are asking about their Jeep Grand Cherokee. Get answers from RepairPal's community of auto experts and enthusiasts.
