2013 Jaguar XKR Has A Vacuum Leak

Identifying the Causes of Vacuum Leaks in Your 2013 Jaguar XKR and How to Resolve Them

Find Repair Location
Reviewed by
Devin Cabugcal
Written by RepairPal Car Genius
Updated January 14, 2025
0%
40% chance it's the
Leaking Vacuum Hoses
0%
30% chance it's the
Leaking Gaskets and Seals
0%
20% chance it's the
Bad Actuators and Valves
0%
10% chance it's
Something else
The most common reasons a 2013 Jaguar XKR has a vacuum leak are leaking vacuum hoses, leaking gaskets and seals, or bad actuators and valves.
  • Leaking Vacuum Hoses: A cracked or disconnected vacuum hose can lead to a loss of engine vacuum, resulting in poor engine performance and increased fuel consumption.
  • Leaking Gaskets and Seals: Aged or damaged gaskets and seals can lead to fluid leaks, resulting in loss of engine oil or coolant and potential engine damage.
  • Bad Actuators and Valves: A malfunctioning actuator or valve can disrupt the proper operation of the vehicle's systems, leading to issues such as poor engine performance or erratic behavior of components like the HVAC system.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a 2013 Jaguar XKR has a vacuum leak?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

Problems with the intake manifold gasket can create the following symptoms:

  • Illuminated check engine light
  • Erratic engine performance
  • Oil and coolant leaks
  • Poor gas mileage
  • Stalling

» LEARN MORE: Intake manifold gasket symptoms

A bad valve cover gasket will result in an oil leak. You may notice oil under the car or on other parts under the hood. You might also notice a burning smell while driving.

» LEARN MORE: Signs of a bad valve cover gasket

Any time there is an emissions fault the check engine light will be displayed. The purpose of the check engine light is to inform the driver that an emission related fault has been found, and that there are on-board diagnostic (OBD) trouble codes stored in the powertrain or engine control module. Additionally, since the emissions systems are so intertwined into engine control and transmission control systems, symptoms may include nearly any sort of drivability concerns. This may include harsh shifting, failure to shift, hesitation on acceleration, jerking, engine failure to start or run, loss of power, or any number of other drivability issues.

What are the steps to diagnose a vacuum leak in a 2013 Jaguar XKR?

To effectively diagnose a vacuum leak in your 2013 Jaguar XKR, begin with a thorough visual inspection of all vacuum hoses. Look for any signs of wear such as cracks, brittleness, or disconnections, as these are common culprits for leaks. Next, check the gaskets and seals around the intake manifold, vacuum pump, and throttle body, as damage in these areas can also lead to leaks. If you suspect a more elusive leak, consider performing a smoke test, which introduces smoke into the system to reveal escaping air. Additionally, reading the vehicle's diagnostic codes can provide valuable insights into potential leak locations. Finally, monitor your vehicle for symptoms like rough idling, loss of brake assistance, or unusual fuel trims, as these can indicate the presence of a vacuum leak. By following this structured approach, you can efficiently identify and address any vacuum leaks, ensuring your Jaguar XKR runs smoothly.

What are the common problems associated with vacuum leaks in a 2013 Jaguar XKR?

When tackling vacuum leaks in a 2013 Jaguar XKR, it's crucial to be aware of the common problems that can arise. One of the primary culprits is cracked vacuum hoses, which can develop over time due to wear and exposure to heat. These cracks can lead to a significant loss of vacuum pressure, affecting engine performance. Another frequent issue is a leaking intake manifold gasket, which can compromise the seal between the manifold and the engine, resulting in air leaks that disrupt the air-fuel mixture. Additionally, the throttle body gasket can also be a source of vacuum leaks, as it connects the throttle body to the intake manifold and can deteriorate, leading to similar performance issues. In rare cases, a cracked intake manifold itself may be the source of the problem, requiring more extensive repairs. Identifying these issues early is essential for maintaining the efficiency and performance of your Jaguar XKR, and addressing them promptly can save you time and money in the long run.

How urgent is it to address the vacuum leak in my 2013 Jaguar XKR?

Addressing a vacuum leak in your 2013 Jaguar XKR is not just a matter of routine maintenance; it is a critical issue that demands immediate attention. A vacuum leak can significantly disrupt your vehicle's performance by allowing excess air to enter the engine, which can lead to rough idling and poor fuel efficiency. Moreover, if the leak is due to damaged vacuum hoses, delaying repairs can result in severe engine damage over time, potentially leading to costly repairs that could have been avoided. Symptoms such as loss of brake servo assistance and abnormal fuel trim levels are clear indicators that the problem is serious and should not be ignored. By promptly fixing a vacuum leak, you not only enhance your vehicle's performance but also safeguard against further complications that could compromise your safety and lead to more expensive repairs down the line. Therefore, it is crucial to prioritize this repair to ensure the longevity and reliability of your Jaguar XKR.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.

Common Vacuum Leak Issues in 2013 Jaguar XKR | RepairPal