1993 Isuzu Trooper Cruise Control Isn't Working

Fixing Cruise Control Issues in the 1993 Isuzu Trooper

Find Repair Location
Reviewed by
Aisha
Written by RepairPal Car Genius
Updated January 14, 2025
0%
30% chance it's the
Sensor
0%
25% chance it's the
Control Module
0%
25% chance it's the
Throttle
0%
20% chance it's
Something else
The most common reasons a 1993 Isuzu Trooper cruise control isn't working are failed control module, sensor or switch issues, or throttle actuation problems.
  • Sensor: A faulty or malfunctioning sensor can lead to incorrect readings, causing issues with engine performance or other systems relying on accurate data.
  • Control Module: A faulty control module can lead to erratic vehicle behavior or failure of various electronic systems due to improper signal processing.
  • Throttle: A faulty throttle body or a defective accelerator pedal position sensor may be causing inconsistent throttle response.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a 1993 Isuzu Trooper cruise control isn't working?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

When the throttle position sensor fails, the engine's computer tends to overcompensate with fuel, leading black exhaust coming from the tailpipe. There is a strong possibility of engine misfires, and the check engine light will come on.

Throttle position sensors can also develop "dead spots," or certain places along the throttle curve where it doesn't get a reading. When this happens, the above symptoms can occur but then stop when you further press or let off the gas pedal.

When the vehicle speed sensor fails or the wiring harness prevents signal transmission, the speedometer is the first thing that will stop functioning properly. This can be an intermittent issue where the speedometer only works occasionally, the speedometer may cease all function, or the speedometer may read erratically or incorrectly. Also, the traction control and anti lock brake warning lights specific to each vehicle may be illuminated, depending on the design of those systems. You may notice the vehicle hesitate to accelerate, cruise control will not function properly, and the vehicle may not shift properly through all of the gears.

In the event that a wheel speed sensor fails, the ABS, traction control system (TCS) and manufacturer specific stability control system lights will illuminate, informing the driver that the systems are disabled. The vehicle will be more prone to tire slip, and normal driving patterns may need to be adjusted to correct for the loss of computer control. On older vehicle's, the speedometer can be affected, causing illumination of the check engine light as well.

If the cruise control refuses to turn on at all, the actuator could be at fault. Likewise, if the cruise control stays on but does not maintain a consistent speed, the problem could be a bad actuator. In extreme cases, a malfunctioning actuator could cause the throttle to stick and prevent the vehicle from slowing down. These symptoms may point to a bad actuator. They may also point to other problems with the cruise control and related systems.

The cruise control switch can cause complete failure of the cruise control feature, but in a lucky scenario only partial functionality will be lost. This means that the cruise control may come on, but that it will not increase in speed automatically, or the cancel button does not work leading the driver to cancel cruise control with the foot brake. In some vehicles, the cruise control light may illuminate, or a warning message may be displayed due to lack of functionality.

A faulty cruise control module will simply result in deactivation of cruise control settings. This is because a detected error in the cruise control system could lead to hazardous driving conditions, so the module will be disabled, and the cruise control system warning light will be displayed. This will be a different message depending on make and model, and a warning light or message may be displayed on the driver instrument cluster.

What are the initial steps to diagnose the non-functional cruise control in a 1993 Isuzu Trooper?

To effectively diagnose the non-functional cruise control in a 1993 Isuzu Trooper, start with the simplest checks before moving on to more complex diagnostics. Begin by inspecting the fuse associated with the cruise control system; a blown fuse is a common culprit that can easily be replaced. Next, examine the cruise control switch for any visible damage or wear, as a faulty switch can prevent the system from engaging. It's also crucial to inspect the vacuum lines for leaks or damage, since any loss of vacuum pressure can disrupt the cruise control's operation. Additionally, test the brake pedal switch, which is designed to disengage the cruise control when the brake is applied; a malfunction here can also hinder functionality. Finally, consider using a diagnostic scanner to check for any error codes that may provide insight into specific issues affecting the cruise control system. By following these steps, you can systematically identify and address the problem, making it easier to restore your vehicle's cruise control functionality.

What are the common problems that could cause the cruise control to stop working in a 1993 Isuzu Trooper?

When diagnosing cruise control issues in a 1993 Isuzu Trooper, it's essential to consider several common problems that may be at play. A blown fuse is often the simplest culprit, as it can disrupt the entire system's functionality. If the fuse is intact, the next step is to inspect the cruise control switch, which may be faulty and prevent proper engagement. Additionally, vacuum leaks can significantly impact the system's operation, so checking for any leaks in the vacuum lines is crucial. A malfunctioning speed sensor can also hinder the cruise control's ability to maintain speed, making it another key area to investigate. Furthermore, issues with the brake light switch can interfere with the system's engagement and disengagement, while a malfunctioning throttle cable can affect speed maintenance. By systematically checking these components, DIYers can effectively troubleshoot and potentially resolve the cruise control issues in their Isuzu Trooper.

How urgent is it to repair the non-functioning cruise control in a 1993 Isuzu Trooper?

When evaluating the urgency of repairing the non-functioning cruise control in your 1993 Isuzu Trooper, it's essential to consider the implications of neglecting this issue. While cruise control is primarily a convenience feature, its malfunction can lead to increased driver fatigue during long trips, potentially compromising safety. If you find that the cruise control system is causing erratic behavior or affecting the vehicle's drivability, it becomes crucial to address the repair promptly to avoid any safety risks. Additionally, if you frequently rely on this feature for comfort during your drives, the inconvenience of its failure may warrant a quicker resolution. Lastly, maintaining the functionality of all vehicle features, including cruise control, can positively impact your Trooper's resale value, making it a wise investment to repair sooner rather than later. Ultimately, the decision hinges on your personal driving habits and safety considerations, but addressing the issue can enhance both your driving experience and the longevity of your vehicle.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.

1993 Isuzu Trooper Cruise Control Issues & Repairs