The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.
When the throttle position sensor fails, the engine's computer tends to overcompensate with fuel, leading black exhaust coming from the tailpipe. There is a strong possibility of engine misfires, and the check engine light will come on.
Throttle position sensors can also develop "dead spots," or certain places along the throttle curve where it doesn't get a reading. When this happens, the above symptoms can occur but then stop when you further press or let off the gas pedal.
When the vehicle speed sensor fails or the wiring harness prevents signal transmission, the speedometer is the first thing that will stop functioning properly. This can be an intermittent issue where the speedometer only works occasionally, the speedometer may cease all function, or the speedometer may read erratically or incorrectly. Also, the traction control and anti lock brake warning lights specific to each vehicle may be illuminated, depending on the design of those systems. You may notice the vehicle hesitate to accelerate, cruise control will not function properly, and the vehicle may not shift properly through all of the gears.
In the event that a wheel speed sensor fails, the ABS, traction control system (TCS) and manufacturer specific stability control system lights will illuminate, informing the driver that the systems are disabled. The vehicle will be more prone to tire slip, and normal driving patterns may need to be adjusted to correct for the loss of computer control. On older vehicle's, the speedometer can be affected, causing illumination of the check engine light as well.
If the cruise control refuses to turn on at all, the actuator could be at fault. Likewise, if the cruise control stays on but does not maintain a consistent speed, the problem could be a bad actuator. In extreme cases, a malfunctioning actuator could cause the throttle to stick and prevent the vehicle from slowing down. These symptoms may point to a bad actuator. They may also point to other problems with the cruise control and related systems.
The cruise control switch can cause complete failure of the cruise control feature, but in a lucky scenario only partial functionality will be lost. This means that the cruise control may come on, but that it will not increase in speed automatically, or the cancel button does not work leading the driver to cancel cruise control with the foot brake. In some vehicles, the cruise control light may illuminate, or a warning message may be displayed due to lack of functionality.
A faulty cruise control module will simply result in deactivation of cruise control settings. This is because a detected error in the cruise control system could lead to hazardous driving conditions, so the module will be disabled, and the cruise control system warning light will be displayed. This will be a different message depending on make and model, and a warning light or message may be displayed on the driver instrument cluster.
When diagnosing a non-functioning cruise control in a 2000 Hyundai Tiburon, it's essential to adopt a systematic approach that begins with the simplest potential issues before progressing to more complex diagnostics. Start by checking the brake light switch, as a malfunction here can prevent the cruise control from engaging. Next, inspect the cruise control buttons on the steering wheel for any signs of wear or damage, as these can also hinder functionality. Following this, verify the operation of the vehicle speed and ABS sensors, since faulty sensors can trigger warning lights and disrupt the cruise control system. It's also crucial to examine the wiring and vacuum system associated with the cruise control, ensuring that all connections are secure and that there are no leaks in the vacuum lines. Don’t forget to check the fuse related to the cruise control in the fuse box, as a blown fuse can easily cause the system to fail. Additionally, ensure that all tail and brake lights are functioning properly, as issues here can affect the cruise control circuit. If these steps do not resolve the issue, consider resetting the car's computer, which can sometimes clear minor glitches. Finally, investigate any other electrical problems that may be present, such as corrosion or water damage, which could impact the cruise control system. By following this diagnostic approach, you can effectively identify and address the underlying issues affecting your cruise control.
When troubleshooting cruise control issues in a 2000 Hyundai Tiburon, it's essential to consider several common problems that may be at play. A faulty brake light switch is often the primary culprit, as it plays a crucial role in signaling the cruise control system. If this switch fails, it can prevent the cruise control from engaging. Additionally, issues with brake or tail lights, particularly when using LED bulbs, can disrupt the system due to differences in electrical resistance. It's also important to inspect the cruise control switch or buttons on the steering wheel, as wear and tear or spills can lead to malfunctions. Furthermore, problems with the vehicle speed sensor or ABS sensors can affect the cruise control's functionality, so be on the lookout for any warning lights on the dashboard. Lastly, check the wiring and vacuum lines associated with the cruise control system, as damaged connections can hinder performance. By systematically examining these areas, you can effectively diagnose and potentially resolve the cruise control issues in your Tiburon.
While the non-functioning cruise control in a 2000 Hyundai Tiburon may not pose an immediate safety risk, it is essential to recognize that neglecting this issue could lead to more significant problems down the line. The cruise control system, while a convenience feature, is interconnected with other critical components of the vehicle. For instance, a malfunctioning brake light switch, which is vital for both the cruise control and the brake lights, could indicate a need for repair. Additionally, issues with the vehicle speed sensor or ABS sensors may not only affect cruise control functionality but could also trigger warning lights, signaling deeper mechanical concerns. Therefore, while you can continue to drive without cruise control, it is advisable to investigate the root cause of the malfunction. Addressing these symptoms promptly can prevent further complications and ensure that your vehicle remains in optimal condition, ultimately enhancing your driving experience.
See what others are asking about their Hyundai Tiburon. Get answers from RepairPal's community of auto experts and enthusiasts.
Read about related problems experienced by other Hyundai Tiburon drivers like you.