The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.
When a tire pressure monitoring sensor fails, the tire pressure monitoring system control module will recognize a loss in communication and turn on the warning lamp which indicates the failure. This is most often the case. However, the tire pressure monitoring sensor may also fail by reporting incorrect tire pressures. This could cause a flat tire to go unrecognized, or a properly inflated tire to signal a low or high tire pressure warning.
When a relearn is needed, for any reason, the TPMS warning light will illuminate, and many vehicles will display a message relating to the TPMS system being inoperative or loosing communication. It is important to keep a watchful eye on tire pressures when this system is having issues because there is no warning available for underinflation or overinflation of the tires.
Wheels offer very few symptoms, but these symptoms should never be ignored. Visible cracks on the wheels may appear, especially after hitting a large bump, Most often, this will also be accompanied by loss of air from the tire on that wheel. Also, vibration in the steering wheel is very common when the tire is out of balance, and improper wheel nuts or bolts can cause creaking and popping noises to develop. Again, there are very few symptoms, but they should not be ignored.
The only symptoms of a TPMS control module failure are failing to alert the driver of underinflation or overinflation of one or more tires, failure to communicate with the body control module or TPMS sensors, or erroneously reporting incorrect tire pressure.
The only symptoms requiring diagnosis for the tire pressure monitoring system warning lamp is if the warning lamp has illuminated while the tires have correct air pressure, or if the air pressure for the tires is out of specification and the warning lamp is off. This is because the overwhelming majority of cases where the TPMS lamp illuminates is due to the change in ambient temperature.
When the tire pressure warning light remains illuminated in your 2016 Hyundai Azera, it can be a source of concern, but understanding the common problems can help you diagnose the issue. One of the primary reasons for the light staying on is a leaking tire, which may not hold air properly, leading to unsafe driving conditions. Additionally, a malfunctioning tire pressure monitoring system (TPMS) could be at fault, either due to a sensor failure or an issue with the system's circuitry. It's also possible that the tire pressure is simply above or below the manufacturer's recommended levels, triggering the warning light. Another common issue is a blocked pressure port on the TPMS sensor, often caused by dirt or debris, which can prevent accurate readings. Lastly, electrical problems within the vehicle's onboard computer can also lead to persistent warning lights. To address these issues, start by checking and adjusting your tire pressures, inspecting for leaks, and considering a reset of the TPMS system. If problems persist, further investigation into the TPMS components may be necessary to ensure your vehicle remains safe and efficient on the road.
To effectively diagnose the tire pressure warning light issue in your 2016 Hyundai Azera, start with the simplest solutions before moving on to more complex diagnostics. Begin by checking the tire pressure in all tires, including the spare, ensuring they are inflated to the recommended range of 30-35 PSI. If the pressure is correct, inspect the tires and wheels for any visible leaks that could be causing the warning light to activate. Should the light remain illuminated after addressing tire pressure, attempt to reset the Tire Pressure Monitoring System (TPMS) by using the reset button on the dashboard or navigating through the vehicle settings. If the warning persists, it may indicate a malfunctioning TPMS sensor, so check that the sensors are operational. For specific guidance, consult your owner's manual, which provides detailed information on the TPMS and dashboard warning lights. If these steps do not resolve the issue, it may be necessary to schedule a service appointment with a Hyundai dealership or authorized service center for professional assistance. By following this diagnostic approach, you can systematically address the tire pressure warning light issue in your vehicle.
If the tire pressure warning light remains illuminated in your 2016 Hyundai Azera, it is crucial to take immediate action to ensure your safety and the longevity of your vehicle. Ignoring this warning can lead to decreased handling performance, increased tire wear, and even tire blowouts, which pose significant risks while driving. Start by checking for any visible leaks in your tires, as a slow leak is a common culprit for the warning light. Next, inspect the condition of your wheels to confirm they are properly holding air. If everything appears normal, the issue may lie within the tire pressure monitoring system (TPMS), which could be malfunctioning. Resetting the TPMS is often a straightforward process that can be done at a service station, and driving the vehicle after inflating the tires to the recommended pressure may also help reset the system. Always refer to your owner's manual for specific instructions tailored to your model. If the warning light persists despite these efforts, it is advisable to seek professional assistance to diagnose any underlying issues, as timely intervention can prevent further complications and ensure your vehicle remains safe to drive.
Read about related problems experienced by other Hyundai Azera drivers like you.
See what others are asking about their Hyundai Azera. Get answers from RepairPal's community of auto experts and enthusiasts.
