Hyundai Azera Repair and Maintenance
A guide to problems, costs, maintenance and repair for your Hyundai Azera
Verified by mechanics, reported by drivers like you
Ask a mechanic in our community
Never overpay. Check prices with our estimator
Hyundai Azera ProblemsImproved Timing Chain Tensioners Available to Correct Noise on Startup
If you experience excessive engine noise on startup (after the engine has been turned off for several hours) that lasts for more than five or six seconds, turn off the engine and check that the engine oil level is correct. If the oil level is correct, the noise may be caused by the timing chain tensioner. Hyundai has an improved tensioner to correct this problem.
Prior to replacing the automatic transmission fluid (to improve shift quality), make sure that the transmission fluid level is correct. Also, make sure the computer that controls the transmission has the most up-to-date adaptive programming information. When servicing these transmissions be sure to use fluid approved by Hyundai.
Problems with the accelerator pedal position switch may cause the Check Engine Light to illuminate; an improved switch is available to fix this problem.
Hyundai Azera QuestionsJust got my used 2013 Azera. When trying to zero out the Trip Computer/Average Speed/Elapsed Time, I pressed DISP for more than 1 second but computer does not clear to zero. What am I missing? (1 answer)
everything is turned off when I park. This car is from Texas to NH. My book says the yellow fuse power connector if you change anything to the car pull the connector in different direction. I have gone thru two new batteries. I winterized it for cold weather.
My azera will start but when you apply the gas chokes out. Checked catalytic converters and they are fine. If you blow air from air compressor into the exhaust on engine it will run but as soon as the air stops car chokes out.
Hyundai Azera RecallsRust Concern with Rear Suspension
The rear suspension is the attaching point for the control arms and other rear suspension components. Road salt and water can accumulate in and around the rear crossmember causing it to rust. Excessive rust could cause one or both rear control arms to separate from the crossmember resulting in a sudden change in vehicle handling, increasing the risk of a crash. Dealers will inspect the rear crossmember and repair or replace it as necessary to correct this concern.
The passenger airbag system on late model vehicles is designed to properly classify the type of passenger occupying the passenger seat. Possibilities include an adult, child, or child safety seat. These vehicles are being recalled because the passenger seat occupant may not be correctly classified by the airbag system. As a result the passenger airbag could deploy with a force inappropriate for the passenger seat occupant, increasing the risk of personal injury. Dealers will recalibrate the airbag system to correct this concern.
The wiring harness for the right front seat belt tension sensor may become damaged after repeated use of the right front seat belt. If the wiring is damaged, the passenger front airbag will not deploy in the event of a crash. Dealers will repair the vehicles free of charge. The recall began February 22, 2010. The Hyundai recall number is 094.