2014 Honda Fit Cruise Control Isn't Working

Common Causes of Cruise Control Malfunctions in Your 2014 Honda Fit and How to Fix Them

Find Repair Location
Reviewed by
Devin Cabugcal
Written by RepairPal Car Genius
Updated January 14, 2025
0%
30% chance it's the
Sensor
0%
25% chance it's the
Control Module
0%
25% chance it's the
Throttle
0%
20% chance it's
Something else
The most common reasons a 2014 Honda Fit cruise control isn't working are failed control module, sensor or switch issues, or throttle actuation problems.
  • Sensor: A faulty or malfunctioning sensor can lead to incorrect readings, causing issues with engine performance or other systems relying on accurate data.
  • Control Module: A faulty control module can lead to erratic vehicle behavior or failure of various electronic systems due to improper signal processing.
  • Throttle: A faulty throttle body or a defective accelerator pedal position sensor may be causing inconsistent throttle response.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a 2014 Honda Fit cruise control isn't working?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

In the event that a wheel speed sensor fails, the ABS, traction control system (TCS) and manufacturer specific stability control system lights will illuminate, informing the driver that the systems are disabled. The vehicle will be more prone to tire slip, and normal driving patterns may need to be adjusted to correct for the loss of computer control. On older vehicle's, the speedometer can be affected, causing illumination of the check engine light as well.

What are the steps to diagnose the cruise control issue in a 2014 Honda Fit?

To effectively diagnose a cruise control issue in your 2014 Honda Fit, start with the simplest checks before delving into more complex components. Begin by inspecting the fuses related to the cruise control and brake light systems, as blown fuses can often be the root of the problem. Next, verify that your brake lights are functioning properly, since a malfunctioning brake light or switch can prevent the cruise control from engaging. If the brake switch appears faulty, consider adjusting or repairing it, as a simple fix like placing a penny over the rubber pad can ensure proper engagement. After addressing these basics, check the cruise control switches on your steering wheel for continuity using a multimeter, as any faulty switches may need replacement. Additionally, inspect the clock spring in the steering wheel, which can wear out and affect the cruise control functionality. If these steps do not resolve the issue, examine the Electronic Control Unit (ECU) and its related fuses, as problems here can significantly impact the cruise control system. Finally, if all else fails, consider putting your car's dashboard into a testing mode to further diagnose the issue. By following this structured approach, you can systematically identify and potentially resolve the cruise control problem in your Honda Fit.

What are the common problems that could cause the cruise control to stop working in a 2014 Honda Fit?

When your cruise control stops working in a 2014 Honda Fit, several common problems could be the culprit. One frequent issue is the brake pedal position switch, which may malfunction if the rubber pad becomes indented, causing the push pin to disengage prematurely. A quick DIY fix involves inserting a penny between the rubber pad and the push pin to ensure proper engagement. Another potential problem lies with the horn relay, which in some models is shared with the cruise control system; if this relay is faulty, replacing it can restore functionality. Additionally, if you've installed LED brake lights, their lower current draw might interfere with the cruise control; adding a resistor to the brake light circuit can help simulate the load of traditional bulbs. Switch failures, particularly in the steering wheel or brake pedal, can also disrupt cruise control operation; cleaning or replacing these switches may be necessary. Furthermore, checking fuses and electrical connections is crucial, as a blown fuse or loose connection can prevent the system from working. Lastly, ensure that throttle and pedal sensors are functioning correctly, as issues here can also impact cruise control performance. By systematically addressing these common problems, you can effectively troubleshoot and potentially resolve the cruise control issues in your Honda Fit.

How urgent is it to address the malfunctioning cruise control in my 2014 Honda Fit?

Addressing the malfunctioning cruise control in your 2014 Honda Fit is important, even if it may not seem urgent at first glance. While the immediate safety risks are minimal, neglecting this issue can lead to increased driver fatigue during long trips, as you will need to manually manage your speed. This can detract from your overall driving experience and may even lead to distractions that could compromise safety. Additionally, if the problem stems from a faulty switch or a loose clutch position sensor, ignoring it could result in further complications down the line, potentially leading to more extensive and costly repairs. Therefore, it is advisable to investigate and resolve the issue promptly to restore the convenience of cruise control and prevent any escalation of the problem. Taking proactive steps now can save you time and money in the future, ensuring a smoother and safer driving experience.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.