2013 Honda Fit Window Won't Go Up Or Down

Common Causes of Window Malfunctions in Your 2013 Honda Fit and How to Fix Them

Find Repair Location
Reviewed by
Andrew Hajjar
Written by RepairPal Car Genius
Updated January 14, 2025
0%
36% chance it's the
Fuse, Relay or Electrical System
0%
20% chance it's the
Window Motor
0%
24% chance it's the
Window Regulator
0%
20% chance it's
Something else
The most common reasons a 2013 Honda Fit window won't go up or down are window's electrical system such as a fuse or relay, a broken window motor, or a broken window regulator.
  • Fuse, Relay or Electrical System: A blown fuse or a faulty relay can disrupt the electrical circuit, causing components to malfunction or not operate at all.
  • Window Motor: A faulty window motor or a broken window regulator can prevent the window from moving up or down properly.
  • Window Regulator: A faulty window regulator can cause the window to become stuck or operate erratically due to worn gears or a broken cable.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a 2013 Honda Fit window won't go up or down?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

If one of the windows in a vehicle will not open or close properly, a failing door window regulator might be the cause. A window that is moving intermittently, or one that gets stuck on the way up or down, could also indicate a broken regulator. Other symptoms might include a clicking, chattering, or grinding noise when the window moves. In some cases a severely damaged window regulator could cause the window to drop inside the door.

When a switch can not make contact and close the circuit, the window cannot be raised and lowered. If the switch on the driver's door will not raise or lower the window in question, but the switch on the corresponding door works just fine, this is a good indication that there is a switch failure. This works the other way around, as well. If the switch on the door does not cause the window to function, but the driver's switch does, that is an indication of a passenger door window switch failure.

Due to the nature of electrical systems on modern vehicles, the range of problems these can cause are nearly limitless. However, there is a way to categorize them in two ways. Permanent and intermittent problems. Permanent problems appear and remain. This may be the vehicle will not start, the radio does not work, or the door chime will not turn off among many, many others. These problems are more straight-forward to diagnose since they present themselves at all time. This means there will always be a fault to find. Intermittent electrical problems, however, can be difficult or impossible to locate, since they appear then disappear without warning. The best case scenario for an intermittent issue is when replicating the problem is easily accomplished and understood. This allows a technician to make an issue semi-permanent, allowing them to find the fault. Other issues that come and go without warning and cannot be replicated on demand must occur when the technician is servicing the vehicle, otherwise there is no problem to correct. It is most important to understand that electrical system faults always require inspection, and can include the vehicle working in any manner, or not working at all.

Like we noted in the last section, general diagnosis symptoms are the most vague of the bunch. There are several diagnostic spectrums, electrical diagnosis, drivability diagnostics, engine diagnostics, transmission diagnostics, and the list could continue for about 5 or 10 more spectrums of diagnostics. The most important take-away here, is that general diagnostics are diagnostics that have no other spectrum in which they fit, or the problem is unknown. This means that any vehicle left outside of a repair facility with the keys and an authorization to perform diagnosis will be diagnosed under the general diagnosis spectrum.

What are the common problems that could cause the window in a 2013 Honda Fit to not go up or down?

When your 2013 Honda Fit's window refuses to move, it can be frustrating, but understanding the common problems can help you diagnose the issue. One of the first areas to check is the electrical system; a blown fuse or a faulty relay can disrupt the power supply to the window motor, preventing it from functioning. If the electrical components are intact, the next likely culprit is the window motor itself, which can fail over time and lead to intermittent or complete loss of window operation. Additionally, the window regulator, which is responsible for the smooth movement of the window, may be broken or jammed, causing the window to get stuck. Wiring issues or a malfunctioning switch can also contribute to the problem, so inspecting these components is essential. Lastly, if you've recently replaced or disconnected the 12-volt battery, the power windows may require manual intervention to reset their operation. By systematically checking these areas, you can identify the root cause of the window malfunction and take the necessary steps to fix it.

How urgent is it to address the malfunctioning window in a 2013 Honda Fit that won't go up or down?

Addressing a malfunctioning window in your 2013 Honda Fit is crucial for several reasons. First and foremost, safety is a primary concern; a window that is stuck in an open or closed position can obstruct your visibility, making driving hazardous. Additionally, if the window is stuck open, it exposes your vehicle to the elements, which can lead to interior damage from rain or snow, further complicating the issue. Security is another significant factor; an improperly functioning window can leave your car vulnerable to theft, as it may not close completely, allowing easy access to potential intruders. Lastly, the convenience of operating your windows is often taken for granted, but when they fail, it can disrupt your daily activities, such as using drive-thru services or managing ventilation. Given these considerations, it is advisable to address the malfunction promptly to ensure your safety, protect your vehicle, and restore your driving convenience.

What steps should I take to diagnose the window issue in my 2013 Honda Fit?

To effectively diagnose the window issue in your 2013 Honda Fit, begin with a systematic approach that prioritizes simpler checks before delving into more complex components. Start by inspecting the fuse and relay associated with the window system, as these are often the first points of failure. If these components are functioning correctly, proceed to examine the window motor, which is crucial for the window's operation; a faulty motor can halt movement entirely. Next, assess the window regulator, as a malfunction here can also impede window functionality. Don’t overlook the window switch; a damaged or malfunctioning switch can prevent the window from responding. Additionally, inspect the wiring for any signs of wear or loose connections, as these can disrupt the electrical flow necessary for operation. Lastly, if your vehicle features a pinch protection mechanism, ensure that it is functioning properly, as issues with this system can also lead to window problems. By following this diagnostic approach, you can efficiently identify and address the root cause of the window issue in your Honda Fit.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.

2013 Honda Fit Window Malfunction: Causes & Repair Costs