The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.
When a tire pressure monitoring sensor fails, the tire pressure monitoring system control module will recognize a loss in communication and turn on the warning lamp which indicates the failure. This is most often the case. However, the tire pressure monitoring sensor may also fail by reporting incorrect tire pressures. This could cause a flat tire to go unrecognized, or a properly inflated tire to signal a low or high tire pressure warning.
When a relearn is needed, for any reason, the TPMS warning light will illuminate, and many vehicles will display a message relating to the TPMS system being inoperative or loosing communication. It is important to keep a watchful eye on tire pressures when this system is having issues because there is no warning available for underinflation or overinflation of the tires.
The only symptoms requiring diagnosis for the tire pressure monitoring system warning lamp is if the warning lamp has illuminated while the tires have correct air pressure, or if the air pressure for the tires is out of specification and the warning lamp is off. This is because the overwhelming majority of cases where the TPMS lamp illuminates is due to the change in ambient temperature.
To effectively diagnose the tire pressure warning light issue on your 2016 GMC Canyon, start by checking the tire pressure in all four tires, ensuring they are inflated to the manufacturer's recommended levels. This is a crucial first step, as incorrect tire pressure is a common cause of the warning light activation. After adjusting the tire pressures, take your vehicle for a short drive; this can often reset the warning light if the issue was simply due to low pressure. If the light continues to flash for 60 to 90 seconds before becoming solid, it may indicate a more specific problem with the tire pressure monitoring system (TPMS). Pay attention to any blinking lights, as these typically signal a significant drop in tire pressure. Additionally, verify that all tire pressure sensors are functioning correctly and that any recently installed tires, especially if they include a TPMS sensor, are properly set up. By following these steps, you can systematically address the tire pressure warning light issue and ensure your vehicle is safe and road-ready.
When the tire pressure warning light remains illuminated in a 2016 GMC Canyon, it often indicates that the tire pressure is either too high or too low, which is a straightforward issue to check. Begin by using a reliable tire pressure gauge to measure the pressure in each tire, ensuring they match the manufacturer's recommended levels found in the owner’s manual or on the driver’s side door jamb. If the pressure is off, simply inflate or deflate the tires as needed. Additionally, the tire pressure monitoring system (TPMS) sensors themselves can malfunction, leading to false warnings. If the tire pressures are correct and the light persists, consider inspecting the sensors for damage or corrosion, as well as checking the vehicle’s fuse related to the TPMS. Resetting the system may also be necessary after addressing any issues, which can typically be done by following the reset procedure outlined in the vehicle’s manual. By systematically checking these common problems, you can effectively troubleshoot and resolve the tire pressure warning light issue in your GMC Canyon.
Addressing the tire pressure warning light that remains illuminated in your 2016 GMC Canyon is crucial for several reasons. First and foremost, low tire pressure can significantly compromise your vehicle's handling and braking capabilities, which poses a serious safety risk, particularly in challenging driving conditions. Additionally, driving on underinflated tires can lead to uneven wear, shortening their lifespan and increasing the likelihood of a blowout, which can be dangerous while on the road. Furthermore, neglecting this warning can negatively impact your fuel efficiency, leading to higher fuel costs over time. Lastly, the tire pressure monitoring system (TPMS) is designed to alert you to potential tire issues, and ignoring this warning could indicate a malfunction within the system itself. Therefore, it is essential to check and adjust your tire pressure promptly or consult a professional to ensure your vehicle remains safe and efficient.
See what others are asking about their GMC Canyon. Get answers from RepairPal's community of auto experts and enthusiasts.
Read about related problems experienced by other GMC Canyon drivers like you.