2020 Ford Fusion Cruise Control Isn't Working

Common Causes of Cruise Control Malfunctions in Your 2020 Ford Fusion and How to Fix Them

Find Repair Location
Reviewed by
Devin Cabugcal
Written by RepairPal Car Genius
Updated January 14, 2025
0%
30% chance it's the
Sensor
0%
25% chance it's the
Control Module
0%
25% chance it's the
Throttle
0%
20% chance it's
Something else
The most common reasons a 2020 Ford Fusion cruise control isn't working are failed control module, sensor or switch issues, or throttle actuation problems.
  • Sensor: A faulty or malfunctioning sensor can lead to incorrect readings, causing issues with engine performance or other systems relying on accurate data.
  • Control Module: A faulty control module can lead to erratic vehicle behavior or failure of various electronic systems due to improper signal processing.
  • Throttle: A faulty throttle body or a defective accelerator pedal position sensor may be causing inconsistent throttle response.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a 2020 Ford Fusion cruise control isn't working?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

When the vehicle speed sensor fails or the wiring harness prevents signal transmission, the speedometer is the first thing that will stop functioning properly. This can be an intermittent issue where the speedometer only works occasionally, the speedometer may cease all function, or the speedometer may read erratically or incorrectly. Also, the traction control and anti lock brake warning lights specific to each vehicle may be illuminated, depending on the design of those systems. You may notice the vehicle hesitate to accelerate, cruise control will not function properly, and the vehicle may not shift properly through all of the gears.

In the event that a wheel speed sensor fails, the ABS, traction control system (TCS) and manufacturer specific stability control system lights will illuminate, informing the driver that the systems are disabled. The vehicle will be more prone to tire slip, and normal driving patterns may need to be adjusted to correct for the loss of computer control. On older vehicle's, the speedometer can be affected, causing illumination of the check engine light as well.

The cruise control switch can cause complete failure of the cruise control feature, but in a lucky scenario only partial functionality will be lost. This means that the cruise control may come on, but that it will not increase in speed automatically, or the cancel button does not work leading the driver to cancel cruise control with the foot brake. In some vehicles, the cruise control light may illuminate, or a warning message may be displayed due to lack of functionality.

What are the steps to diagnose the cruise control issue in a 2020 Ford Fusion?

To effectively diagnose a cruise control issue in your 2020 Ford Fusion, begin with the simplest solutions. Start by checking the cruise control fuse to ensure it is intact, as a blown fuse can easily disrupt the system. Next, inspect the cruise control buttons on your steering wheel for any signs of damage or malfunction, as these controls are essential for operation. If these initial checks do not reveal the problem, utilize an OBD-II scanner to identify any error codes that may indicate specific issues within the cruise control system. Following this, examine the speed sensors, which are critical for the cruise control's functionality, ensuring they are operating correctly. Additionally, inspect the wiring connections for any loose or damaged wires that could be causing a disruption. If all else fails, test the cruise control module to confirm it is sending the correct signals. Should the issue persist after these steps, it may be time to consult a professional mechanic for further assistance. By following this structured diagnostic approach, you can efficiently identify and potentially resolve cruise control issues in your vehicle.

What are the common problems that could cause the cruise control to stop working in a 2020 Ford Fusion?

When the cruise control in your 2020 Ford Fusion ceases to function, several common issues may be at play. One primary culprit could be a faulty brake pedal switch, which is designed to disengage the cruise control when the brake is applied; if this switch malfunctions, it can prevent the system from engaging. Additionally, problems with the speed sensor can disrupt the cruise control's ability to maintain a steady speed, as the system relies on accurate speed readings to function correctly. A blown fuse in the cruise control circuit is another potential issue; inspecting the fuse box for any blown fuses and replacing them can often resolve the problem. Furthermore, a malfunction in the throttle control system may hinder the cruise control's performance, as it directly affects the vehicle's speed regulation. The Electronic Control Module (ECM) is also critical, as any issues here can impact multiple systems, including cruise control. Lastly, wiring problems, such as damaged or loose connections, can disrupt communication between components, leading to system failure. By systematically checking these areas, you can effectively diagnose and potentially fix the cruise control issues in your Ford Fusion.

How urgent is it to address the malfunctioning cruise control in a 2020 Ford Fusion?

Addressing a malfunctioning cruise control in a 2020 Ford Fusion is of utmost urgency due to the significant safety risks it poses. A faulty system can lead to unexpected acceleration or deceleration, which can result in dangerous driving situations and increase the likelihood of accidents. Moreover, the need for constant manual speed adjustments can distract the driver, leading to fatigue and reduced focus on the road. Ignoring these symptoms not only compromises safety but can also lead to higher fuel consumption, as the vehicle struggles to maintain a consistent speed. Therefore, it is crucial for owners to prioritize repairs to ensure a safe and efficient driving experience, preventing further complications and enhancing overall vehicle performance.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.