The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.
Inability to control the windshield wipers comes in several forms, and they are all indicative of windshield wiper switch failure. The windshield wipers may not work in all settings, may not turn on when requested, may not move to their parked position when turning off, or the washer pumps may or may not run at random. This is a general list of symptoms, but failure of anything the windshield wiper switch controls will indicate the need for testing the windshield wiper and washer switch.
A failed windshield wiper motor will do one of two things in the event of failure. First, it can intermittently work, meaning when the wiper switch is turned on, the windshield wipers may activate, and run for a random amount of time. This may happen at random, or change with a bump. Lastly, the windshield wipers could show no signs of activity, indicating motor failure.
The moment water touches the windshield, you know if you need new windshield wiper blades. If your wiper blades are torn, cracked, hard, or brittle, it is time for replacement. Wipers should also be replaced if the wiper blades only smear water around, seem to make a mess, streak the windshield, and miss large patches. If you are unhappy with the current wiper blades on your vehicle, this is a very economical change to make.
Windshield wiper arms will be replaced mainly for aesthetic reasons or damage. If the windshield arms become bent or rusted, the windshield wipers may not contact the windshield at the proper angle, or there may be no contact at all. Also, the sun will take a toll on these parts after years of use, and fading or clear coat peeling will result, not to mention rust.
To effectively diagnose the non-functioning windshield wipers on your 2009 Ford Fusion, begin with the simplest solutions before progressing to more complex diagnostics. Start by checking the fuse associated with the windshield wipers, as a blown fuse is a common and easily fixable issue. If the fuse is intact, inspect the wiper motor to ensure it is receiving power when the wiper switch is activated; this will help determine if the motor itself is faulty. Next, examine the wiper linkage, which connects the motor to the wiper arms, for any signs of damage or disconnection that could impede functionality. If these components are functioning correctly, test the wiper switch to confirm it is sending the appropriate signals to the motor. Finally, assess the condition of the wiper blades, as worn or damaged blades can also contribute to the problem. By following this structured approach, you can systematically identify and resolve the issue with your windshield wipers.
When troubleshooting the windshield wipers on a 2009 Ford Fusion, it's essential to consider several common problems that could lead to their failure. One of the first things to check is the fuse associated with the wiper system; a blown fuse can easily disrupt the power supply, causing the wipers to stop functioning altogether. If the fuse is intact, the next step is to inspect the wiper motor itself, as a malfunctioning motor may prevent the wipers from moving. Additionally, worn or damaged wiper blades can significantly affect performance, so replacing them is a straightforward solution that can restore functionality. It's also important to examine the wiper linkage, which connects the motor to the wiper arms; any breaks or damage here can hinder movement. Lastly, a faulty wiper switch may be the culprit if the motor is not receiving the correct signals. By systematically checking these components, you can effectively diagnose and resolve the issue with your windshield wipers.
When it comes to the urgency of repairing non-functioning windshield wipers on a 2009 Ford Fusion, the consequences of neglecting this issue cannot be overstated. Windshield wipers are essential for maintaining visibility during adverse weather conditions, such as rain or snow, and their failure can significantly impair your ability to see the road clearly. This not only increases the risk of accidents but also poses a danger to both you and other drivers. If your wipers are skipping, leaving streaks, or making unusual noises, these are clear indicators that they require immediate attention to prevent further damage and ensure optimal performance. Ignoring these symptoms can lead to more severe issues down the line, including costly repairs or even complete wiper system failure. Therefore, it is crucial to prioritize the repair of your windshield wipers to maintain safety on the road and avoid potential hazards associated with poor visibility.
See what others are asking about their Ford Fusion. Get answers from RepairPal's community of auto experts and enthusiasts.
Read about related problems experienced by other Ford Fusion drivers like you.