The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.
When a tire pressure monitoring sensor fails, the tire pressure monitoring system control module will recognize a loss in communication and turn on the warning lamp which indicates the failure. This is most often the case. However, the tire pressure monitoring sensor may also fail by reporting incorrect tire pressures. This could cause a flat tire to go unrecognized, or a properly inflated tire to signal a low or high tire pressure warning.
When a relearn is needed, for any reason, the TPMS warning light will illuminate, and many vehicles will display a message relating to the TPMS system being inoperative or loosing communication. It is important to keep a watchful eye on tire pressures when this system is having issues because there is no warning available for underinflation or overinflation of the tires.
Wheels offer very few symptoms, but these symptoms should never be ignored. Visible cracks on the wheels may appear, especially after hitting a large bump, Most often, this will also be accompanied by loss of air from the tire on that wheel. Also, vibration in the steering wheel is very common when the tire is out of balance, and improper wheel nuts or bolts can cause creaking and popping noises to develop. Again, there are very few symptoms, but they should not be ignored.
The only symptoms requiring diagnosis for the tire pressure monitoring system warning lamp is if the warning lamp has illuminated while the tires have correct air pressure, or if the air pressure for the tires is out of specification and the warning lamp is off. This is because the overwhelming majority of cases where the TPMS lamp illuminates is due to the change in ambient temperature.
When diagnosing the tire pressure warning light issue on your 2018 Ford Expedition, it's essential to adopt a systematic approach that begins with the simplest solutions. Start by checking the tire pressure in all four tires using a reliable tire pressure gauge, ensuring they are inflated to the levels recommended in your owner's manual. This initial step can often resolve the warning light if the pressure is low. Next, inspect the tires for any visible damage, such as punctures or bulges, which could indicate a more serious problem. If the tires appear to be in good condition, proceed to reset the tire pressure monitoring system as outlined in your manual; this can help eliminate false alerts. Additionally, examine the valve stems for any signs of leaks or damage, as these can also contribute to pressure issues. If, after these steps, the warning light remains illuminated, it may be time to consult a mechanic or dealership for a professional diagnosis, ensuring that any underlying issues are addressed effectively. By following this diagnostic approach, you can efficiently troubleshoot the tire pressure warning light and maintain the safety and performance of your vehicle.
When the tire pressure warning light remains on in a 2018 Ford Expedition, it can be frustrating for any DIYer. The most prevalent cause is low tire pressure, which can result from a slow leak, temperature fluctuations, or improper inflation. It's essential to check each tire's pressure using a reliable gauge to ensure they are inflated to the manufacturer's recommended levels. If the pressure is adequate, the next step is to inspect the tire pressure sensors. A faulty sensor may fail to provide accurate readings, leading to the warning light staying on. Additionally, consider the possibility of a dead sensor battery, as these components can wear out over time and hinder the sensor's ability to communicate with the vehicle's system. Lastly, electrical issues, such as wiring problems or blown fuses, can disrupt the tire pressure monitoring system's functionality. If you've checked the tires and sensors but the light persists, it may be wise to consult a qualified mechanic to diagnose any underlying electrical problems. By understanding these common issues, you can take proactive steps to resolve the tire pressure warning light concern in your Ford Expedition.
Addressing the tire pressure warning light in a 2018 Ford Expedition is not just a matter of convenience; it is a critical safety concern that demands immediate attention. When this warning light remains illuminated, it signals that the tire pressure may be below the recommended levels, which can severely compromise the vehicle's handling and stability. Low tire pressure can lead to increased stopping distances and a higher risk of skidding, especially in adverse weather conditions. Moreover, driving on under-inflated tires can cause uneven wear, resulting in costly premature tire replacements and decreased fuel efficiency. Ignoring this warning could also indicate more serious issues, such as a tire leak or puncture, which could lead to a sudden flat tire or even a blowout while driving, posing a significant danger to both the driver and other road users. Therefore, it is essential to check the tire pressure, inflate the tires to the recommended specifications, and inspect for any visible damage or leaks as soon as the warning light stays on, ensuring a safe and efficient driving experience.
See what others are asking about their Ford Expedition. Get answers from RepairPal's community of auto experts and enthusiasts.
Read about related problems experienced by other Ford Expedition drivers like you.
