The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.
When a tire pressure monitoring sensor fails, the tire pressure monitoring system control module will recognize a loss in communication and turn on the warning lamp which indicates the failure. This is most often the case. However, the tire pressure monitoring sensor may also fail by reporting incorrect tire pressures. This could cause a flat tire to go unrecognized, or a properly inflated tire to signal a low or high tire pressure warning.
When a relearn is needed, for any reason, the TPMS warning light will illuminate, and many vehicles will display a message relating to the TPMS system being inoperative or loosing communication. It is important to keep a watchful eye on tire pressures when this system is having issues because there is no warning available for underinflation or overinflation of the tires.
Wheels offer very few symptoms, but these symptoms should never be ignored. Visible cracks on the wheels may appear, especially after hitting a large bump, Most often, this will also be accompanied by loss of air from the tire on that wheel. Also, vibration in the steering wheel is very common when the tire is out of balance, and improper wheel nuts or bolts can cause creaking and popping noises to develop. Again, there are very few symptoms, but they should not be ignored.
The only symptoms requiring diagnosis for the tire pressure monitoring system warning lamp is if the warning lamp has illuminated while the tires have correct air pressure, or if the air pressure for the tires is out of specification and the warning lamp is off. This is because the overwhelming majority of cases where the TPMS lamp illuminates is due to the change in ambient temperature.
To effectively diagnose the tire pressure warning light issue on your 2016 Ford Expedition, start by checking the tire pressure in all four tires using a reliable gauge. This initial step is crucial, as under-inflated tires are a common cause for the warning light to illuminate. If you find that the pressure is below the manufacturer's recommended levels, adjust it accordingly to ensure optimal performance. Next, inspect the tires for any visible signs of leaks or damage, as these can also contribute to low pressure. If the tires appear fine, turn your attention to the tire pressure monitoring system (TPMS) sensors; a malfunctioning sensor can trigger the warning light. If necessary, replace any faulty sensors. Finally, if you have corrected the tire pressure but the warning light remains on, consider resetting the TPMS system, which can often be done with a scanner or through the vehicle's onboard settings. By following this structured approach, you can efficiently diagnose and resolve the tire pressure warning light issue, ensuring your vehicle remains safe and roadworthy.
When the tire pressure warning light remains illuminated in your 2016 Ford Expedition, it can be frustrating, but understanding the common problems can help you diagnose the issue. One of the primary culprits is low tire pressure, which is easily checked with a tire pressure gauge. If you find that the pressure is below the recommended levels, simply inflating the tires can often resolve the warning light. However, if the pressure is adequate, the problem may lie with a faulty tire pressure sensor. These sensors can malfunction over time, and replacing them may be necessary to restore proper functionality. Additionally, the tire pressure monitoring system may require recalibration, especially if the vehicle has recently experienced a tire change or rotation. This process can usually be done by following the manufacturer's guidelines. Electrical faults within the monitoring system can also trigger the warning light, so inspecting the wiring and connections for any signs of damage is advisable. Lastly, ensure that there are no obstructions or interference around the tire sensors, as this can lead to inaccurate readings. By systematically addressing these potential issues, you can effectively troubleshoot and resolve the persistent tire pressure warning light in your Ford Expedition.
Addressing the tire pressure warning light on a 2016 Ford Expedition is an urgent matter that should not be overlooked. When this warning light remains illuminated, it signals that the tire pressure may be dangerously low, which can severely compromise vehicle handling and braking capabilities. This poses a significant safety risk, particularly in emergency situations where quick response is crucial. Additionally, driving on underinflated tires can lead to uneven wear, drastically shortening their lifespan and increasing the likelihood of a blowout, which can be both dangerous and costly. Furthermore, low tire pressure negatively impacts fuel efficiency, leading to higher fuel costs over time. Ignoring the warning light may also indicate a malfunction in the Tire Pressure Monitoring System (TPMS), which could require repair or replacement to ensure accurate monitoring. For these reasons, it is essential for DIY enthusiasts to promptly check and address any tire pressure issues to maintain safety, enhance tire longevity, and improve overall vehicle performance.
Read about related problems experienced by other Ford Expedition drivers like you.
See what others are asking about their Ford Expedition. Get answers from RepairPal's community of auto experts and enthusiasts.
