2009 Ford Expedition Tire Pressure Warning Light Stays On

Resolve Tire Pressure Warning Light in 2009 Ford Expedition: Causes and Solutions

Find Repair Location
Reviewed by
Andrew Hajjar
Written by RepairPal Car Genius
Updated January 14, 2025
0%
40% chance it's the
Tire Leaking Air
0%
30% chance it's the
Wheel Leaking Air
0%
15% chance it's the
Tire Pressure Monitoring System
0%
15% chance it's
Something else
The most common reasons a 2009 Ford Expedition tire pressure warning light stays on are a leaking tire, a wheel that no longer holds air, or a faulty tire pressure monitoring system.
  • Tire Leaking Air: A puncture, valve stem issue, or rim damage can cause a tire to leak air, leading to loss of pressure.
  • Wheel Leaking Air: A puncture or damage to the tire or rim can cause air to leak, resulting in a loss of tire pressure.
  • Tire Pressure Monitoring System: A malfunctioning tire pressure monitoring system can be caused by faulty sensors or a dead battery in the sensor units.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a 2009 Ford Expedition tire pressure warning light stays on?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

When a tire pressure monitoring sensor fails, the tire pressure monitoring system control module will recognize a loss in communication and turn on the warning lamp which indicates the failure. This is most often the case. However, the tire pressure monitoring sensor may also fail by reporting incorrect tire pressures. This could cause a flat tire to go unrecognized, or a properly inflated tire to signal a low or high tire pressure warning.

When a relearn is needed, for any reason, the TPMS warning light will illuminate, and many vehicles will display a message relating to the TPMS system being inoperative or loosing communication. It is important to keep a watchful eye on tire pressures when this system is having issues because there is no warning available for underinflation or overinflation of the tires.

Wheels offer very few symptoms, but these symptoms should never be ignored. Visible cracks on the wheels may appear, especially after hitting a large bump, Most often, this will also be accompanied by loss of air from the tire on that wheel. Also, vibration in the steering wheel is very common when the tire is out of balance, and improper wheel nuts or bolts can cause creaking and popping noises to develop. Again, there are very few symptoms, but they should not be ignored.

The only symptoms requiring diagnosis for the tire pressure monitoring system warning lamp is if the warning lamp has illuminated while the tires have correct air pressure, or if the air pressure for the tires is out of specification and the warning lamp is off. This is because the overwhelming majority of cases where the TPMS lamp illuminates is due to the change in ambient temperature.

What steps should I take to diagnose the tire pressure warning light issue on my 2009 Ford Expedition?

To effectively diagnose the tire pressure warning light issue on your 2009 Ford Expedition, begin by checking the tire pressure in all four tires using a reliable tire pressure gauge. Ensure that each tire is inflated to the recommended levels specified in your vehicle's manual, as improper inflation is a common cause of warning lights. Next, visually inspect the tires for any signs of damage, such as punctures, cuts, or bulges, which could indicate a leak or other issues. If the tire pressure is correct and the tires appear undamaged, the next step is to reset the tire pressure monitoring system (TPMS), as sometimes the system may require a reset to clear any false warnings. Refer to your vehicle's manual for specific instructions on how to perform this reset. Additionally, check the TPMS sensors located on each tire to ensure they are functioning properly and are not damaged. If, after completing these steps, the warning light remains illuminated, it may be time to consult a mechanic or dealership for a more thorough diagnosis and potential repairs. By following this structured approach, you can efficiently identify and address the tire pressure warning light issue, ensuring your vehicle remains safe and roadworthy.

What are the common causes for the tire pressure warning light to remain on in a 2009 Ford Expedition?

When the tire pressure warning light remains illuminated in a 2009 Ford Expedition, it often indicates underlying issues that require attention. The most prevalent cause is low tire pressure, which can result from slow leaks, temperature fluctuations, or general wear and tear. It's essential to check each tire's pressure regularly, especially during seasonal changes. Another potential culprit is a faulty tire pressure sensor; if the sensor fails to provide accurate readings, it may trigger the warning light unnecessarily. Additionally, the batteries in the tire pressure monitoring system (TPMS) sensors can deplete over time, leading to persistent alerts. In some cases, the TPMS module itself may malfunction, necessitating replacement or reprogramming. Electrical issues, such as blown fuses or wiring problems, can also interfere with the system's functionality. Lastly, recalibrating the TPMS may be required to reset the warning light, which can often be done through the vehicle's onboard computer. By systematically addressing these common problems, you can effectively troubleshoot and resolve the tire pressure warning light issue in your Ford Expedition.

How urgent is it to address the tire pressure warning light on a 2009 Ford Expedition that stays on?

Addressing the tire pressure warning light on a 2009 Ford Expedition that remains illuminated is an urgent matter that should not be overlooked. This warning light serves as a critical alert indicating that either the tire pressure monitoring system is malfunctioning or that the tires themselves are not properly inflated. Ignoring this warning can lead to severe consequences, including tire overheating and potential blowouts, which pose significant safety risks while driving. For DIY enthusiasts, the first step is to safely pull over and check the tire pressure using a reliable gauge. Ensuring that all tires are inflated to the manufacturer’s recommended levels is essential for optimal performance and safety. If the tires are correctly inflated and the warning light persists, it may indicate a deeper issue with the monitoring system that requires further investigation. Taking prompt action not only helps maintain the integrity of your tires but also ensures a safer driving experience for you and others on the road.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.