The average cost for a 2000 Mercury Villager Fuel Injector Replacement is between $329 and $380.
Labor costs are estimated between $110 and $161 while parts are typically priced around $219.
This range does not include taxes and fees, and does not factor in your unique location. Related repairs may also be needed.
For a more accurate estimate based on your location, use our Fair Price Estimator below.
Fuel Injector Replacement
What is a fuel injector?
Fuel injectors regulate the amount of pressurized fuel used for each engine cycle. There is one injector per cylinder in an engine.
How does the fuel injector work?
Each time an intake stroke occurs in the engine, the vehicle's computer will send a signal to the fuel injectors, requesting they spray fuel. For heavy acceleration, the duration of the fuel spraying will be longer than if the engine were idling.
Failing fuel injectors can cause engine misfiring and hesitation. The Check Engine Light may come on and set diagnostic trouble code(s).
What are the symptoms related to a bad fuel injector?
When a fuel injector fails or clogs, engine power is reduced and misfires will occur. The check engine light will turn on and, as the issue progresses, the engine may stall immediately after starting, fail to start, hesitate under throttle or vibrate roughly.
Can I drive with a fuel injector problem?
It's not smart to drive a vehicle with a fuel injector problem. These issues can cause the car to stall every few moments and accelerate unpredictably, creating a hazard.
If the problem is bad enough, the vehicle may not even start, making it impossible to drive.
How often do fuel injectors need to be replaced?
On average, fuel injectors tend to fail after 80,000 miles, and require little maintenance. To prolong the life of the fuel injectors, follow the scheduled maintenance schedule for cleaning the fuel delivery system and injectors.
How are fuel injector issues diagnosed?
If fuel delivery system symptoms are present, the technician will first conduct a visual inspection. If the issue isn't clear after a physical inspection, the technician will connect a computerized scanner to the vehicle to read some of its sensors.
If there's a fuel injector problem, the technician would most likely find that misfires are happening frequently on one cylinder. The fuel injector or injectors in question must be tested, and may require removal for bench testing. Any failed components must be replaced, and the vehicle will be checked to ensure the problem is fixed.
How is a fuel injector replaced?
Typically, the intake manifold must be removed to access and replace the fuel injectors. This can be a large job that may involve draining the coolant and oil, removing many engine components, and replacing the intake manifold gasket. Some cars, though, are designed with plastic intake manifolds that do not have oil or coolant passages, making this process easier.
Once access is available, the fuel injector is disconnected from the fuel rail and electrical connector and removed. The new one is then installed in its place.
Using lower quality gasoline can result in recurring fuel injector problems, even after a fuel injector replacement.
Fuel injector seals should always be replaced along with fuel injectors.
