The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.
When a tire pressure monitoring sensor fails, the tire pressure monitoring system control module will recognize a loss in communication and turn on the warning lamp which indicates the failure. This is most often the case. However, the tire pressure monitoring sensor may also fail by reporting incorrect tire pressures. This could cause a flat tire to go unrecognized, or a properly inflated tire to signal a low or high tire pressure warning.
When a relearn is needed, for any reason, the TPMS warning light will illuminate, and many vehicles will display a message relating to the TPMS system being inoperative or loosing communication. It is important to keep a watchful eye on tire pressures when this system is having issues because there is no warning available for underinflation or overinflation of the tires.
Wheels offer very few symptoms, but these symptoms should never be ignored. Visible cracks on the wheels may appear, especially after hitting a large bump, Most often, this will also be accompanied by loss of air from the tire on that wheel. Also, vibration in the steering wheel is very common when the tire is out of balance, and improper wheel nuts or bolts can cause creaking and popping noises to develop. Again, there are very few symptoms, but they should not be ignored.
The only symptoms requiring diagnosis for the tire pressure monitoring system warning lamp is if the warning lamp has illuminated while the tires have correct air pressure, or if the air pressure for the tires is out of specification and the warning lamp is off. This is because the overwhelming majority of cases where the TPMS lamp illuminates is due to the change in ambient temperature.
To effectively diagnose the tire pressure warning light issue in your 2013 Dodge Avenger, start with the simplest solutions before moving on to more complex diagnostics. Begin by checking the tire pressure in all four tires, ensuring they match the recommended levels indicated on the placard located on the driver's side doorjamb. Remember that tire pressure can fluctuate with temperature changes, so always measure when the tires are cold. If the pressure is correct, inspect each tire for any visible damage, leaks, or uneven wear that could affect performance. If everything appears normal, you may need to reset the Tire Pressure Monitoring System (TPMS) by driving the vehicle above 15 mph for about 20 minutes, allowing the system to recalibrate. If the warning light remains illuminated, check the TPMS sensors for proper installation and functionality, especially if you've recently changed your tires or rims. Lastly, if the light persists, consult your owner's manual for guidance on relearning the TPMS sensors or consider seeking professional assistance to diagnose any potential system malfunctions. By following this structured approach, you can efficiently identify and address the tire pressure warning light issue.
When the tire pressure warning light remains illuminated in a 2013 Dodge Avenger, it often indicates underlying issues that require attention. One of the primary culprits is incorrect tire pressure; tires must be inflated to the specifications listed on the placard located on the driver's side doorjamb. It's essential to check the tire pressure when the tires are cold, as temperature fluctuations can cause pressure changes. Additionally, inspect the tires for any signs of leaks or damage, as a faulty or leaking tire can trigger the warning light. If the tire pressure is correct and the tires are in good condition, the issue may lie with the TPMS sensors themselves, which can malfunction and require replacement. After addressing these potential problems, driving the vehicle at speeds above 15 mph for about 20 minutes can help reset the system and turn off the warning light. If all else fails, disconnecting the battery for a brief period may serve as a last resort to reset the system, although this should be approached with caution. By systematically checking these factors, you can effectively diagnose and resolve the issue with the tire pressure warning light.
When the tire pressure warning light remains illuminated in your 2013 Dodge Avenger, it signals an urgent need for attention. Ignoring this warning can lead to serious safety risks, including reduced traction and increased likelihood of tire blowouts, which can compromise your control over the vehicle. Underinflated tires not only diminish fuel efficiency but also accelerate tire wear, leading to costly replacements. It is essential to pull over safely and check the tire pressures immediately, ensuring they align with the recommended levels specified in your owner’s manual. If the light persists or flashes, it may indicate a malfunction in the tire pressure monitoring system itself, necessitating a professional inspection. Regular maintenance, including monthly tire pressure checks, is crucial to prevent such issues from arising and to ensure your vehicle operates safely and efficiently. Addressing the tire pressure warning light without delay is vital for your safety and the longevity of your tires.
Read about related problems experienced by other Dodge Avenger drivers like you.
See what others are asking about their Dodge Avenger. Get answers from RepairPal's community of auto experts and enthusiasts.
