The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.
A faulty oxygen sensor is one of the most common causes of a check engine light. Symptoms may include a decrease in fuel mileage, hesitation or misfiring from the engine, rough idling or even stalling. A faulty sensor may cause the vehicle to fail an emissions test.
Any time there is an emissions fault the check engine light will be displayed. The purpose of the check engine light is to inform the driver that an emission related fault has been found, and that there are on-board diagnostic (OBD) trouble codes stored in the powertrain or engine control module. Additionally, since the emissions systems are so intertwined into engine control and transmission control systems, symptoms may include nearly any sort of drivability concerns. This may include harsh shifting, failure to shift, hesitation on acceleration, jerking, engine failure to start or run, loss of power, or any number of other drivability issues.
Due to the nature of electrical systems on modern vehicles, the range of problems these can cause are nearly limitless. However, there is a way to categorize them in two ways. Permanent and intermittent problems. Permanent problems appear and remain. This may be the vehicle will not start, the radio does not work, or the door chime will not turn off among many, many others. These problems are more straight-forward to diagnose since they present themselves at all time. This means there will always be a fault to find. Intermittent electrical problems, however, can be difficult or impossible to locate, since they appear then disappear without warning. The best case scenario for an intermittent issue is when replicating the problem is easily accomplished and understood. This allows a technician to make an issue semi-permanent, allowing them to find the fault. Other issues that come and go without warning and cannot be replicated on demand must occur when the technician is servicing the vehicle, otherwise there is no problem to correct. It is most important to understand that electrical system faults always require inspection, and can include the vehicle working in any manner, or not working at all.
Like we noted in the last section, general diagnosis symptoms are the most vague of the bunch. There are several diagnostic spectrums, electrical diagnosis, drivability diagnostics, engine diagnostics, transmission diagnostics, and the list could continue for about 5 or 10 more spectrums of diagnostics. The most important take-away here, is that general diagnostics are diagnostics that have no other spectrum in which they fit, or the problem is unknown. This means that any vehicle left outside of a repair facility with the keys and an authorization to perform diagnosis will be diagnosed under the general diagnosis spectrum.
When the Check Engine Light comes on, you may experience engine performance issues such as poor acceleration, rough idling, or an engine that won't start. In some cases, no abnormal symptoms will be experienced. Other systems like the transmission or ABS can cause the Check Engine Light to illuminate and lights for those systems can come on at the same time. Similar lights may say "Check Engine Soon", "Malfunction Indicator Light" or just "Check". In rare case the engine can overheat.
When faced with a check engine light on your 1991 Chrysler New Yorker, start your diagnostic journey with the simplest solutions. First, check the gas cap; a loose or damaged cap is a common culprit that can easily trigger the light. Next, take a moment to scan the dashboard for any additional warning lights, as they may provide clues about other underlying issues. If everything appears normal, proceed to inspect the OBD-I system using an OBD-I scanner to retrieve any trouble codes that can guide your troubleshooting efforts. Additionally, visually examine the engine and its components for any signs of wear or damage, such as frayed wires or cracked hoses, which could indicate a more serious problem. If these steps do not resolve the issue or if the check engine light remains illuminated, it may be time to consult a mechanic for a professional diagnosis. By following this structured approach, you can effectively narrow down the potential causes of the check engine light and take informed steps toward resolving the issue.
When the check engine light comes on in your 1991 Chrysler New Yorker, it can be a source of concern, but understanding the common problems that may cause this warning can empower you to take action. One frequent culprit is a gas cap issue; either a loose or damaged gas cap can disrupt the fuel system's pressure, triggering the light. Additionally, hard failures in the vehicle's systems, such as a malfunctioning component, will keep the light illuminated until repairs are made. Spark plug and plug wire problems are also common, as they can lead to misfires that activate the check engine light. Low oil levels can further complicate matters, as insufficient lubrication can cause engine performance issues. Lastly, ignition coil failures can result in similar misfires, making it essential to check these components. By addressing these potential issues promptly, you can prevent further complications and ensure your vehicle runs smoothly.
When the check engine light illuminates on your 1991 Chrysler New Yorker, it signals a need for immediate attention to prevent further complications. Ignoring this warning can lead to serious safety risks and costly repairs down the line. Start by checking the emissions system, as many issues stem from this critical component. Performing a diagnostic check is essential; count the light's flashes to identify the trouble code, which can guide your next steps. Utilizing an OBD I scanner will allow you to retrieve specific diagnostic trouble codes, pinpointing the exact problem. Pay close attention to the catalytic converter and various sensors, as malfunctions here are common culprits. Additionally, inspect the transmission by moving the shift lever through all positions, which can reveal underlying issues. Don't overlook simple fixes like ensuring the gas cap is secure, as a loose cap can trigger the light. Once you've addressed the root cause, learn how to reset the check engine light to confirm that the issue has been resolved. Remember, driving with the check engine light on can compromise your vehicle's safety and performance, so take these steps seriously to maintain your Chrysler New Yorker in optimal condition.
Read about related problems experienced by other Chrysler New Yorker drivers like you.
See what others are asking about their Chrysler New Yorker. Get answers from RepairPal's community of auto experts and enthusiasts.