2007 Chrysler Aspen Windshield Wipers Aren't Working

Common Causes of Windshield Wiper Failures in Your 2007 Chrysler Aspen and How to Fix Them

Find Repair Location
Reviewed by
Bo Fader
Written by RepairPal Car Genius
Updated January 14, 2025
0%
75% chance it's the
Wiper Motor
0%
25% chance it's the
Switch
The most common reasons a 2007 Chrysler Aspen windshield wipers aren't working are broken wiper motor and issues with the switch.
  • Wiper Motor: A faulty wiper motor or a bad electrical connection can result in intermittent or non-functioning windshield wipers.
  • Switch: A faulty switch can result in intermittent or complete failure of the electrical component it controls, leading to malfunctioning systems.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a 2007 Chrysler Aspen windshield wipers aren't working?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

A failed windshield wiper motor will do one of two things in the event of failure. First, it can intermittently work, meaning when the wiper switch is turned on, the windshield wipers may activate, and run for a random amount of time. This may happen at random, or change with a bump. Lastly, the windshield wipers could show no signs of activity, indicating motor failure.

The moment water touches the windshield, you know if you need new windshield wiper blades. If your wiper blades are torn, cracked, hard, or brittle, it is time for replacement. Wipers should also be replaced if the wiper blades only smear water around, seem to make a mess, streak the windshield, and miss large patches. If you are unhappy with the current wiper blades on your vehicle, this is a very economical change to make.

Windshield wiper arms will be replaced mainly for aesthetic reasons or damage. If the windshield arms become bent or rusted, the windshield wipers may not contact the windshield at the proper angle, or there may be no contact at all. Also, the sun will take a toll on these parts after years of use, and fading or clear coat peeling will result, not to mention rust.

What are the steps to diagnose the non-functioning windshield wipers on a 2007 Chrysler Aspen?

To effectively diagnose non-functioning windshield wipers on a 2007 Chrysler Aspen, it's essential to adopt a systematic approach that prioritizes simpler fixes before delving into more complex issues. Start by checking the fuse related to the windshield wipers, as a blown fuse is a common and easily rectifiable problem. If the fuse is intact, the next step is to inspect the wiper motor; ensure that it is receiving power when the wiper switch is activated. If the motor is powered but still unresponsive, it may require replacement. Following this, examine the wiper linkage, which connects the motor to the wiper arms, for any signs of wear or disconnection. If the linkage appears to be in good condition, test the wiper switch located on the steering column to ensure it is functioning properly and sending the correct signals to the motor. Finally, consider the condition of the wiper blades themselves, as worn-out blades can significantly impact performance. By following this structured diagnostic approach, you can efficiently identify and resolve the issues affecting your windshield wipers.

What are the common problems that could cause the windshield wipers to stop working on a 2007 Chrysler Aspen?

When dealing with non-functioning windshield wipers on a 2007 Chrysler Aspen, it's essential to consider several common problems that could be at play. One of the first things to check is the fuse associated with the wiper system; a blown fuse can easily disrupt the power supply, rendering the wipers inoperable. If the fuse is intact, the next step is to inspect the wiper motor itself, as a malfunctioning motor may fail to engage the wipers. Additionally, worn wiper blades can significantly impair visibility, so ensuring they are in good condition is crucial. Another potential issue is the linkage that connects the wiper motor to the wiper arms; if this linkage is broken, the wipers will not function correctly. Lastly, a faulty wiper switch can prevent the wipers from turning on altogether. By systematically checking these components, DIYers can effectively diagnose and address the issues causing their windshield wipers to stop working.

How urgent is it to repair the non-functioning windshield wipers on a 2007 Chrysler Aspen?

When it comes to repairing non-functioning windshield wipers on a 2007 Chrysler Aspen, the urgency cannot be overstated. Windshield wipers are crucial for maintaining visibility during adverse weather conditions, and their failure can significantly increase the risk of accidents. If your wipers are not operating correctly, it may indicate underlying issues such as a disconnected wiper motor link arm, blown fuses, or electrical malfunctions. These problems not only compromise your safety but can also lead to more extensive damage to the wiper system if left unaddressed. Even if the wipers make noise or move slightly, this can signal a malfunction that requires immediate attention. For DIY enthusiasts, tackling this repair promptly is essential not only for your safety but also to prevent escalating repair costs in the future. Therefore, addressing the issue of non-functioning windshield wipers should be a top priority to ensure safe driving conditions.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.