2020 Chevrolet Impala Tire Pressure Warning Light Stays On

Tire Pressure Warning Light in 2020 Chevrolet Impala: Causes and Solutions

Find Repair Location
Reviewed by
Bo Fader
Written by RepairPal Car Genius
Updated January 14, 2025
0%
40% chance it's the
Tire Leaking Air
0%
30% chance it's the
Wheel Leaking Air
0%
15% chance it's the
Tire Pressure Monitoring System
0%
15% chance it's
Something else
The most common reasons a 2020 Chevrolet Impala tire pressure warning light stays on are a leaking tire, a wheel that no longer holds air, or a faulty tire pressure monitoring system.
  • Tire Leaking Air: A puncture, valve stem issue, or rim damage can cause a tire to leak air, leading to loss of pressure.
  • Wheel Leaking Air: A puncture or damage to the tire or rim can cause air to leak, resulting in a loss of tire pressure.
  • Tire Pressure Monitoring System: A malfunctioning tire pressure monitoring system can be caused by faulty sensors or a dead battery in the sensor units.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a 2020 Chevrolet Impala tire pressure warning light stays on?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

When a tire pressure monitoring sensor fails, the tire pressure monitoring system control module will recognize a loss in communication and turn on the warning lamp which indicates the failure. This is most often the case. However, the tire pressure monitoring sensor may also fail by reporting incorrect tire pressures. This could cause a flat tire to go unrecognized, or a properly inflated tire to signal a low or high tire pressure warning.

When a relearn is needed, for any reason, the TPMS warning light will illuminate, and many vehicles will display a message relating to the TPMS system being inoperative or loosing communication. It is important to keep a watchful eye on tire pressures when this system is having issues because there is no warning available for underinflation or overinflation of the tires.

The only symptoms requiring diagnosis for the tire pressure monitoring system warning lamp is if the warning lamp has illuminated while the tires have correct air pressure, or if the air pressure for the tires is out of specification and the warning lamp is off. This is because the overwhelming majority of cases where the TPMS lamp illuminates is due to the change in ambient temperature.

What are the initial steps to diagnose a tire pressure warning light that stays on in a 2020 Chevrolet Impala?

To effectively diagnose a tire pressure warning light that remains illuminated in your 2020 Chevrolet Impala, begin by checking the tire pressure in all four tires, including the spare if applicable. Ensure that the pressure aligns with the manufacturer's specifications, typically found on a sticker inside the driver's side door jamb or in the owner's manual. Next, inspect each tire for any visible damage such as punctures, cuts, or bulges, as these can lead to pressure loss and trigger the warning light. If the tire pressure is correct and no damage is evident, consider resetting the tire pressure monitoring system (TPMS), as it may require a reset after adjustments or tire replacements. If the light persists, a malfunctioning tire pressure sensor could be the culprit, necessitating a visit to a mechanic for further diagnosis and potential replacement. Lastly, using a diagnostic tool to scan for error codes related to the TPMS can provide additional insights into the issue, helping you pinpoint the problem more accurately. By following these steps, you can systematically address the tire pressure warning light and ensure your vehicle's safety and performance.

What could be causing the tire pressure warning light to stay on in a 2020 Chevrolet Impala?

When the tire pressure warning light stays on in a 2020 Chevrolet Impala, it can signal several common issues that DIYers can troubleshoot. The first step is to check the tire pressure in all four tires, as low pressure is a frequent cause of the warning light. Ensuring that each tire is inflated to the recommended levels can often resolve the issue. If the tire pressure is adequate, the next area to investigate is the tire pressure monitoring system (TPMS) sensors. These sensors can sometimes malfunction or require recalibration, leading to persistent warning lights. Additionally, consider the possibility of depleted batteries in the sensors, which can also prevent them from functioning correctly. If these basic checks do not resolve the issue, it may indicate a more complex problem within the TPMS itself, which could require a diagnostic test to identify. By methodically addressing these potential causes, you can effectively troubleshoot the tire pressure warning light and maintain your vehicle's safety and performance.

How urgent is it to address the tire pressure warning light that stays on in a 2020 Chevrolet Impala?

Addressing the tire pressure warning light in your 2020 Chevrolet Impala is not just a matter of convenience; it is a critical safety concern that requires immediate attention. When this warning light remains illuminated, it signals that your tires may be underinflated, which can severely compromise your vehicle's handling and braking capabilities. This increases the likelihood of accidents, putting both you and other road users at risk. Additionally, driving on improperly inflated tires can lead to uneven wear, significantly shortening their lifespan and potentially resulting in a dangerous blowout while driving. Beyond safety, neglecting this warning can also impact your wallet; underinflated tires decrease fuel efficiency, leading to higher fuel costs over time. Furthermore, the tire pressure monitoring system (TPMS) itself may be malfunctioning, which could require repairs to ensure accurate monitoring in the future. Therefore, it is essential to check your tire pressure and inflate your tires to the recommended levels as soon as the warning light stays on, ensuring your safety and the longevity of your vehicle.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.