RepairPal Certified shops can diagnose and repair your 2006 Buick Rendezvous. They provide transparent pricing with a minimum 12-month or 12,000-mile warranty on repairs and services.
Oops! We got lost!
Your location cannot be detected. Please enter your zipcode for nearby shops.
This is the procedure:
1. Insert the master key with the black head into the ignition lock cylinder
2. Turn the key to ON but do not start the engine. The SECURITY light will turn on and stay on.
3. Wait 10 minutes or until the SECURITY light to turn off.
4. Turn the key to OFF for 5 seconds.
5. Turn the key to ON but do not start the engine. The SECURITY light will turn on and stay on.
6. Wait 10 minutes or until the SECURITY light to turn off.
7. Turn the key to OFF for 5 seconds.
8. Turn the key to ON but do not start the engine. The SECURITY light will turn on and stay on.
9. Wait 10 minutes or until the SECURITY light to turn off.
10. Turn the key to OFF. The key transponder will be learned on the next start cycle.
11. Start the vehicle. If it starts and runs normally, the relearn is complete. If you need to program additional keys,
12. Turn the key to OFF.
13. Insert the next key. Turn it to ON within 10 seconds of removing the previously used key.
14. Wait for the SECURITY light to turn off. That may happen quickly. You may not even notice it.
15. Repeat steps 12 through 14 for all additional keys.
This is the procedure: 1. Insert the master key with the black head into the ignition lock cylinder 2. Turn the key to ON but do not start the engine. The SECURITY light will turn on and stay on. 3. Wait 10 minutes or until the SECURITY light to turn off. 4. Turn the key to OFF for 5 seconds. 5. Turn the key to ON but do not start the engine. The SECURITY light will turn on and stay on. 6. Wait 10 minutes or until the SECURITY light to turn off. 7. Turn the key to OFF for 5 seconds. 8. Turn the key to ON but do not start the engine. The SECURITY light will turn on and stay on. 9. Wait 10 minutes or until the SECURITY light to turn off. 10. Turn the key to OFF. The key transponder will be learned on the next start cycle. 11. Start the vehicle. If it starts and runs normally, the relearn is complete. If you need to program additional keys, 12. Turn the key to OFF. 13. Insert the next key. Turn it to ON within 10 seconds of removing the previously used key. 14. Wait for the SECURITY light to turn off. That may happen quickly. You may not even notice it. 15. Repeat steps 12 through 14 for all additional keys.