2020 Audi Q7 Cruise Control Isn't Working

Common Causes of Cruise Control Malfunctions in Your 2020 Audi Q7 and How to Fix Them

Find Repair Location
Reviewed by
Bo Fader
Written by RepairPal Car Genius
Updated January 14, 2025
0%
30% chance it's the
Sensor
0%
25% chance it's the
Control Module
0%
25% chance it's the
Throttle
0%
20% chance it's
Something else
The most common reasons a 2020 Audi Q7 cruise control isn't working are failed control module, sensor or switch issues, or throttle actuation problems.
  • Sensor: A faulty or malfunctioning sensor can lead to incorrect readings, causing issues with engine performance or other systems relying on accurate data.
  • Control Module: A faulty control module can lead to erratic vehicle behavior or failure of various electronic systems due to improper signal processing.
  • Throttle: A faulty throttle body or a defective accelerator pedal position sensor may be causing inconsistent throttle response.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a 2020 Audi Q7 cruise control isn't working?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

In the event that a wheel speed sensor fails, the ABS, traction control system (TCS) and manufacturer specific stability control system lights will illuminate, informing the driver that the systems are disabled. The vehicle will be more prone to tire slip, and normal driving patterns may need to be adjusted to correct for the loss of computer control. On older vehicle's, the speedometer can be affected, causing illumination of the check engine light as well.

What are the steps to diagnose the non-functioning cruise control in a 2020 Audi Q7?

To effectively diagnose the non-functioning cruise control in your 2020 Audi Q7, begin with a systematic approach that prioritizes simpler checks before delving into more complex diagnostics. Start by inspecting the cruise control fuse located in the fuse box; a blown fuse is an easy fix that can restore functionality. Next, examine the cruise control buttons on the steering wheel for any signs of damage or sticking, as these can hinder operation. If the buttons are in good condition, proceed to verify the speed sensors, as faulty sensors can disrupt the cruise control system. Utilizing a diagnostic scanner to check for error codes can provide valuable insights into any underlying issues. Additionally, inspect the brake and clutch switches, as malfunctioning switches can prevent the cruise control from engaging. Don’t overlook the wiring and connections associated with the cruise control system; ensure they are secure and free from damage. Finally, test the cruise control module itself, as a malfunction here could be the root cause of the problem. By following this structured diagnostic approach, you can efficiently identify and address the issue with your cruise control system.

What are the common problems that could cause the cruise control to stop working in a 2020 Audi Q7?

When troubleshooting the cruise control system in a 2020 Audi Q7, it's essential to understand the common problems that may lead to its malfunction. One prevalent issue is a faulty speed sensor, which can disrupt the system's ability to accurately gauge the vehicle's speed, preventing the cruise control from engaging or maintaining the desired speed. Additionally, problems with the brake light switch can interfere with the cruise control's operation, as the system relies on signals from the brake system to function correctly. Another potential culprit is a malfunctioning throttle actuator, which controls the engine's throttle opening and is crucial for maintaining speed. If the cruise control module itself is defective, it may require replacement to restore functionality. Lastly, electrical problems such as wiring issues or blown fuses can also hinder the cruise control system's performance. By identifying and addressing these common issues, DIY enthusiasts can effectively diagnose and potentially resolve cruise control problems in their Audi Q7.

How urgent is it to address the malfunctioning cruise control in a 2020 Audi Q7?

Addressing a malfunctioning cruise control system in a 2020 Audi Q7 is of utmost importance due to the significant safety risks it poses. A malfunction can lead to unexpected acceleration or deceleration, which can create hazardous driving conditions and increase the likelihood of accidents. Moreover, neglecting this issue can exacerbate the problem, potentially resulting in more extensive damage to the vehicle's components and leading to costly repairs down the line. It is crucial to act promptly by consulting a certified Audi technician who can accurately diagnose and repair the issue, ensuring that the cruise control system functions safely and effectively. By prioritizing this repair, you not only enhance your driving safety but also protect your investment in the vehicle.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.

2020 Audi Q7 Cruise Control Not Working: Causes & Repairs