2013 Audi A6 Windshield Wipers Aren't Working

Troubleshooting Common Issues with Windshield Wipers on Your 2013 Audi A6 and How to Fix Them

Find Repair Location
Reviewed by
Devin Cabugcal
Written by RepairPal Car Genius
Updated January 14, 2025
0%
75% chance it's the
Wiper Motor
0%
25% chance it's the
Switch
The most common reasons a 2013 Audi A6 windshield wipers aren't working are broken wiper motor and issues with the switch.
  • Wiper Motor: A faulty wiper motor or a bad electrical connection can result in intermittent or non-functioning windshield wipers.
  • Switch: A faulty switch can result in intermittent or complete failure of the electrical component it controls, leading to malfunctioning systems.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a 2013 Audi A6 windshield wipers aren't working?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

A failed windshield wiper motor will do one of two things in the event of failure. First, it can intermittently work, meaning when the wiper switch is turned on, the windshield wipers may activate, and run for a random amount of time. This may happen at random, or change with a bump. Lastly, the windshield wipers could show no signs of activity, indicating motor failure.

The moment water touches the windshield, you know if you need new windshield wiper blades. If your wiper blades are torn, cracked, hard, or brittle, it is time for replacement. Wipers should also be replaced if the wiper blades only smear water around, seem to make a mess, streak the windshield, and miss large patches. If you are unhappy with the current wiper blades on your vehicle, this is a very economical change to make.

Windshield wiper arms will be replaced mainly for aesthetic reasons or damage. If the windshield arms become bent or rusted, the windshield wipers may not contact the windshield at the proper angle, or there may be no contact at all. Also, the sun will take a toll on these parts after years of use, and fading or clear coat peeling will result, not to mention rust.

What steps should I take to diagnose the non-functioning windshield wipers on my 2013 Audi A6?

To effectively diagnose the non-functioning windshield wipers on your 2013 Audi A6, begin with a systematic approach that prioritizes simpler solutions before delving into more complex issues. Start by checking the fuse associated with the windshield wipers, as a blown fuse is a common and easily fixable problem. If the fuse is intact, proceed to inspect the wiper motor to ensure it is receiving power and operating correctly. Next, examine the wiper linkage, which connects the motor to the wiper arms, for any signs of damage or disconnection. If these components are functioning properly, test the wiper switch, as a faulty switch can prevent the wipers from activating. Finally, assess the condition of the wiper blades themselves; worn-out blades can lead to ineffective wiping and may need replacement. By following this diagnostic approach, you can efficiently identify and resolve the issue with your windshield wipers.

What are the common problems that could cause the windshield wipers to stop working on a 2013 Audi A6?

When troubleshooting the issue of non-functioning windshield wipers on a 2013 Audi A6, it's crucial to identify the common problems that may be causing this malfunction. Start by checking the wiper system's fuse, as a blown fuse is a frequent culprit that can easily disrupt wiper operation. If the fuse is in good condition, the next area to investigate is the wiper motor, which may be faulty and could require repair or replacement to restore functionality. Additionally, consider the condition of the wiper blades; worn or damaged blades can lead to ineffective wiping and may need to be replaced for optimal performance. It's also wise to examine the wiper linkage, as any breaks or damage in this component can hinder the wipers' movement. Lastly, a malfunctioning wiper switch could be the source of the problem, and replacing it might be necessary to ensure proper operation. By methodically checking these common issues, you can effectively diagnose and resolve the problem with your windshield wipers.

How urgent is it to address the non-functioning windshield wipers on a 2013 Audi A6?

Addressing the issue of non-functioning windshield wipers on your 2013 Audi A6 is of utmost urgency due to the significant safety risks it poses. When windshield wipers fail to operate, your visibility is drastically reduced during rain, snow, or other inclement weather, which can lead to dangerous driving conditions and increase the likelihood of accidents. Moreover, functioning wipers are not just a convenience; they are a legal requirement in many jurisdictions. Driving without them can result in fines or penalties, as it violates road safety regulations designed to protect all road users. Therefore, it is crucial to diagnose and repair any issues with your windshield wipers promptly, ensuring both your safety and compliance with the law. Taking immediate action can prevent further complications and enhance your overall driving experience.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.