2014 Acura TSX Cruise Control Isn't Working

Common Causes of Cruise Control Malfunctions in Your 2014 Acura TSX and How to Fix Them

Find Repair Location
Reviewed by
Bo Fader
Written by RepairPal Car Genius
Updated January 14, 2025
0%
30% chance it's the
Sensor
0%
25% chance it's the
Control Module
0%
25% chance it's the
Throttle
0%
20% chance it's
Something else
The most common reasons a 2014 Acura TSX cruise control isn't working are failed control module, sensor or switch issues, or throttle actuation problems.
  • Sensor: A faulty or malfunctioning sensor can lead to incorrect readings, causing issues with engine performance or other systems relying on accurate data.
  • Control Module: A faulty control module can lead to erratic vehicle behavior or failure of various electronic systems due to improper signal processing.
  • Throttle: A faulty throttle body or a defective accelerator pedal position sensor may be causing inconsistent throttle response.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a 2014 Acura TSX cruise control isn't working?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

In the event that a wheel speed sensor fails, the ABS, traction control system (TCS) and manufacturer specific stability control system lights will illuminate, informing the driver that the systems are disabled. The vehicle will be more prone to tire slip, and normal driving patterns may need to be adjusted to correct for the loss of computer control. On older vehicle's, the speedometer can be affected, causing illumination of the check engine light as well.

The cruise control switch can cause complete failure of the cruise control feature, but in a lucky scenario only partial functionality will be lost. This means that the cruise control may come on, but that it will not increase in speed automatically, or the cancel button does not work leading the driver to cancel cruise control with the foot brake. In some vehicles, the cruise control light may illuminate, or a warning message may be displayed due to lack of functionality.

What are the initial steps to diagnose the non-functioning cruise control in a 2014 Acura TSX?

To effectively diagnose the non-functioning cruise control in your 2014 Acura TSX, start with the simplest solutions before moving on to more complex diagnostics. Begin by checking the vehicle's fuse box for any blown fuses, as this is a common issue that can disrupt the cruise control system. If you find a blown fuse, replacing it may resolve the problem. Next, examine the brake pedal switch, which can also cause cruise control malfunctions if it is defective. A quick test involves placing your left foot behind the brake pedal and gently lifting it while attempting to engage the cruise control; if the cruise control activates, the brake pedal switch may need adjustment or replacement. By following these initial steps, you can efficiently narrow down the potential causes of the cruise control issue and determine whether further investigation is necessary.

What are the common problems that could cause the cruise control to stop working in a 2014 Acura TSX?

When the cruise control in a 2014 Acura TSX ceases to function, several common problems may be at play. One of the primary culprits is often a failed control module, sensor, or switch, which can disrupt the entire system's operation. Additionally, throttle actuation issues can prevent the cruise control from engaging properly. It's also essential to check for a blown fuse, as well as the condition of the brake light and brake switch, since these components are integral to the cruise control's functionality. Furthermore, problems with the clutch safety switch or brake safety switch, along with potential issues in the clock spring located in the steering wheel, can also lead to cruise control malfunctions. To effectively diagnose the problem, start by inspecting the signals sent to the controller, examining the actuator, and addressing any electrical or mechanical issues that may be present. By systematically checking these components, you can identify the root cause of the cruise control failure and take the necessary steps to restore its functionality.

How urgent is it to address the non-functioning cruise control in a 2014 Acura TSX?

When it comes to a non-functioning cruise control in a 2014 Acura TSX, understanding the urgency of the situation is crucial for any DIY enthusiast. While the immediate safety risks may not be apparent, neglecting this issue can lead to a less enjoyable driving experience and may signal deeper electronic or sensor problems within the vehicle. The cruise control system is designed to enhance comfort and reduce fatigue during long drives, making it an essential feature for highway travel. If left unaddressed, the malfunction could escalate, potentially affecting other vehicle systems and leading to more significant repairs down the line. Therefore, it is advisable to investigate the root cause of the malfunction promptly. This could involve checking fuses, inspecting the brake pedal switch, or examining the vehicle's electronic control unit. By taking proactive steps to diagnose and repair the cruise control system, you not only restore a valuable feature but also contribute to the overall health of your vehicle, ensuring a safer and more pleasant driving experience.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.

Troubleshooting 2014 Acura TSX Cruise Control Issues