2010 Acura TL Cruise Control Isn't Working

Common Causes of Cruise Control Malfunctions in Your 2010 Acura TL and How to Fix Them

Find Repair Location
Reviewed by
Devin Cabugcal
Written by RepairPal Car Genius
Updated January 14, 2025
0%
30% chance it's the
Sensor
0%
25% chance it's the
Control Module
0%
25% chance it's the
Throttle
0%
20% chance it's
Something else
The most common reasons a 2010 Acura TL cruise control isn't working are failed control module, sensor or switch issues, or throttle actuation problems.
  • Sensor: A faulty or malfunctioning sensor can lead to incorrect readings, causing issues with engine performance or other systems relying on accurate data.
  • Control Module: A faulty control module can lead to erratic vehicle behavior or failure of various electronic systems due to improper signal processing.
  • Throttle: A faulty throttle body or a defective accelerator pedal position sensor may be causing inconsistent throttle response.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a 2010 Acura TL cruise control isn't working?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

In the event that a wheel speed sensor fails, the ABS, traction control system (TCS) and manufacturer specific stability control system lights will illuminate, informing the driver that the systems are disabled. The vehicle will be more prone to tire slip, and normal driving patterns may need to be adjusted to correct for the loss of computer control. On older vehicle's, the speedometer can be affected, causing illumination of the check engine light as well.

The cruise control switch can cause complete failure of the cruise control feature, but in a lucky scenario only partial functionality will be lost. This means that the cruise control may come on, but that it will not increase in speed automatically, or the cancel button does not work leading the driver to cancel cruise control with the foot brake. In some vehicles, the cruise control light may illuminate, or a warning message may be displayed due to lack of functionality.

What are the initial diagnostic steps to troubleshoot the non-functional cruise control in a 2010 Acura TL?

When troubleshooting the non-functional cruise control in a 2010 Acura TL, it's essential to adopt a systematic diagnostic approach. Start by checking the fuses related to the cruise control system, as a blown fuse can often be the simplest and quickest fix. If the fuses are intact, proceed to verify the signals entering the cruise control module; this ensures that the system is receiving the necessary inputs to function correctly. Next, inspect the actuator, which is responsible for controlling the throttle; a malfunctioning actuator can prevent the cruise control from engaging. If these components appear to be in good working order, consider replacing any faulty parts that may be affecting the system's performance. By following these steps in order, you can effectively identify and resolve the issues with your cruise control, making your DIY troubleshooting process more efficient and successful.

What are the common problems that could cause the cruise control to stop working in a 2010 Acura TL?

When dealing with cruise control issues in a 2010 Acura TL, it's essential to understand the common problems that may be at play. One frequent culprit is a faulty brake pedal switch, which is designed to disengage the cruise control when the brake is applied; if this switch malfunctions, it can prevent the system from engaging. Additionally, speed sensor issues can disrupt the cruise control's ability to maintain a steady speed, as the system relies on accurate speed readings to function correctly. Another potential problem is a blown fuse within the cruise control system, which can easily be checked and replaced if necessary. Furthermore, a malfunctioning throttle actuator may hinder the cruise control's response to commands, leading to operational failures. Lastly, issues with the Electronic Control Module (ECM) can also affect the cruise control, as this component manages various vehicle functions, including cruise control operations. By systematically checking these components, DIYers can effectively troubleshoot and potentially resolve cruise control problems in their Acura TL.

How urgent is it to address the non-functioning cruise control in a 2010 Acura TL?

Addressing a non-functioning cruise control in a 2010 Acura TL is important, even if it may not seem like an immediate emergency. While the absence of this feature does not pose a direct safety risk, it can significantly affect your driving comfort and convenience, especially during long trips on the highway. A malfunctioning cruise control system can lead to driver fatigue, as maintaining a constant speed becomes a manual task, which can be tiring over extended periods. Moreover, ignoring the issue could lead to further complications, such as more extensive repairs down the line or the potential for other related systems to fail. For those who frequently rely on cruise control, the inconvenience of its absence can quickly become frustrating. Therefore, it is advisable to diagnose and repair the underlying issue promptly to restore the functionality of this valuable feature, ensuring a smoother and more enjoyable driving experience. Taking action sooner rather than later can save you from the hassle of dealing with a more significant problem in the future.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.