What is your question?
·
·
What is your question?
My alternator had been overcharging my battery for an hour and a half, when I stopped and waited an hr I started the car and removed my negative cable all the lights, dash,headlights,a/c, flashed and car shutoff and I reconnected the negative and put a meter on the battery tested 12.6 , pulled and replace the 120A fusible link on + cable and the 30A start fuse in the fuse box in engine compartment .all other fuses tested good. And still nothing when I turn the key??? A
4 Replies
check voltage at starter battery terminal when turning the key to the start position.
Battery needs to be load tested! Charging system also needs to be tested! Why did you remove the battery cable while the engine was running?? That was a mistake! One of the easiest things you can do is try a jump start, with cables hooked up correctly. Just because a "meter" reads 12.6 volts means nothing as far as what load the battery can overcome! (hold and recover)