2020 Toyota C-HR Radiator Fan Isn't Working

Radiator Fan Not Working in 2020 Toyota C-HR: Causes and Solutions

Find Repair Location
Reviewed by
Devin Cabugcal
Written by RepairPal Car Genius
Updated January 14, 2025
0%
34% chance it's the
Fan Motor or Clutch
0%
28% chance it's the
Fan Relay or Fuse
0%
23% chance it's the
Temp Sensor or Fan Control Module
0%
15% chance it's
Something else
The most common reasons a 2020 Toyota C-HR radiator fan isn't working are the fan assembly, the fan clutch, or the coolant temperature sensor.
  • Fan Motor or Clutch: A faulty fan motor or a malfunctioning fan clutch can result in inadequate cooling, causing the engine to overheat.
  • Fan Relay or Fuse: A faulty fan relay or blown fuse can prevent the cooling fan from operating, leading to engine overheating.
  • Temp Sensor or Fan Control Module: A faulty temperature sensor or fan control module can result in incorrect readings, causing the engine to overheat or the cooling fan to operate improperly.
Proper diagnosis will determine the exact cause of your symptom, saving you money on unnecessary repairs. The diagnostic experts at RepairPal Certified shops have the right tools and experience to solve any symptom.

How much does it cost to fix a 2020 Toyota C-HR radiator fan isn't working?

Common Repairs

The total repair cost will vary based on the condition of your vehicle and the number of repairs needed to fix your symptom. Proper diagnosis will save you money by finding the exact repairs needed to fix your car right the first time.

Over time serpentine belts stretch, crack, and the ribs that ride on the accessory pulleys being to wear smooth. A squealing noise that increases with engine speed or as engine driven accessories are turned on may be noted. The noise is caused by the belt slipping on the pulleys, insufficiently driving them. Ineffective air conditioning, a battery warning light, or intermittent power steering assist can result from this.

»MORE: Symptoms of a bad serpentine belt

The bad thermostat can cause two different sets of problems, depending on whether it's stuck open or stuck closed.

A thermostat that is stuck open can cause the engine to run colder than normal and turn on the check engine light. It may also cause poor fuel mileage and the heater to blow cool air.

A thermostat that is stuck closed will cause the vehicle to overheat. If a new thermostat doesn't resolve engine temperature problems, the cooling system needs to be checked for other issues.

» LEARN MORE: Signs of a bad thermostat, and how to fix it

When the engine coolant temperature sensor fails, it will send inaccurate information to the vehicle’s computer, causing the computer to react to false operating conditions. This will cause the engine to consume more fuel than normal, depleting fuel mileage, and causing black, sooty smoke from the engine under moderate to heavy acceleration. The check engine light will illuminate, and on-board diagnostic trouble codes may be stored for exhaust and emission system failure, fuel delivery system failure, and engine cooling system failure. Overheating may also occur, as the coolant sensor may be leaking fluid out of the engine, creating a an air pocket in the system.

What are the initial diagnostic steps to take when the radiator fan isn't working on a 2020 Toyota C-HR?

When faced with a non-functioning radiator fan in your 2020 Toyota C-HR, it's essential to adopt a systematic diagnostic approach. Begin by checking the fuse associated with the radiator fan; a blown fuse is a common and easily fixable issue that can halt fan operation. If the fuse is intact, the next step is to inspect the relay, which is responsible for supplying power to the fan. A malfunctioning relay can disrupt the fan's functionality, so ensure it is in good working order. Following this, test the fan motor itself to confirm it is receiving power; if it isn't, the problem may lie in the wiring or the motor. Additionally, the temperature sensor should be examined, as it plays a vital role in activating the fan when needed. Lastly, inspect the wiring for any signs of damage or corrosion, as compromised wiring can significantly affect performance. By methodically working through these steps, you can effectively diagnose and address the radiator fan issue in your vehicle.

What are the common causes for the radiator fan not working in a 2020 Toyota C-HR?

When troubleshooting the radiator fan issue in a 2020 Toyota C-HR, it's essential to consider several common problems that could be at play. A faulty fan motor is often the primary culprit, as it can prevent the fan from spinning and effectively cooling the radiator. Additionally, a blown fuse may disrupt the electrical flow to the fan, so checking the fuse box for any blown fuses is a crucial step. Another potential issue is a malfunctioning temperature sensor, which may fail to signal the fan to activate when the engine reaches a certain temperature. Wiring problems, such as loose connections or frayed wires, can also hinder the fan's operation, making it vital to inspect the wiring for any signs of damage. Furthermore, low coolant levels can impact the fan's efficiency, so ensuring that the coolant is at the appropriate level is important. Lastly, relay issues can prevent the fan from functioning correctly, so examining the relay for defects is necessary. By systematically addressing these common causes, you can effectively diagnose and potentially resolve the radiator fan issue in your vehicle.

How urgent is it to repair the non-working radiator fan in a 2020 Toyota C-HR to prevent engine overheating?

When it comes to the radiator fan in your 2020 Toyota C-HR, urgency is paramount. A malfunctioning radiator fan can lead to severe engine overheating, which poses significant risks not only to your vehicle's performance but also to your safety on the road. The radiator fan is essential for regulating the engine's temperature by dissipating heat; without it, the engine can quickly reach dangerous temperatures. This overheating can result in catastrophic damage, including warped cylinder heads and blown head gaskets, which are costly to repair. Additionally, an overheating engine can lead to decreased performance and increased fuel consumption, making your vehicle less efficient and more expensive to operate. Ignoring the signs of a failing radiator fan can also leave you stranded, creating safety hazards if your vehicle breaks down unexpectedly. Therefore, addressing any issues with the radiator fan as soon as they arise is crucial for maintaining the health of your engine and ensuring safe driving conditions. Taking prompt action not only prevents costly repairs but also extends the lifespan of your vehicle, making it a wise choice for any DIY enthusiast.

You’ve got options with RepairPal

Whether you need a more accurate auto repair estimate or help finding a reputable shop in your area, we’ve got you covered.