What is your question?
·
·
What is your question?
I am trying to chnge the upper/lower ball joint on my 1990 Toyota pick up. I have removed the brake caliper, dust cover, and bolt/washer off the spindle. The hub/rotor still will not come off. What step have i forgot to do? Any help will be greatly appreciated. THANKS in advance
1 Reply
Okay before I get ahead of myself is it 2wd or 4wd either way your hub should be a sealed hub meaning it bolts to the knuckle and the rotor should be floating on the hub it should only have two clips holding the rotor to the hub which was only used for original assembly to keep the rotors from falling off while going down the assembly line! If it is 4wd does it have manual locking hubs or automatic locking hubs? If so you will have to disassemble the locking hub then remove the retaining nuts from the bearing then the rotor should come right off! Toyotas must be good vehicles because it has been awhile since I have worked on the brake rotor on one! Hope this helps you out! Goodluck!
This is a 4wd with auto hubs. I have just got the hub cover off and I hope on my way to gettin it fixed. THANKS