Driver Window Failure to Go Up

Had the same problem. Turned out to be the center consol switch. Pry it up from the rear. Unplug the connectors. Turn it upside down and remove the screws holding the two halfs together. The metal plates become corroded but can be cleaned with an eraser. Look at the switch carefully as there are some small parts that can fall out if your not watching. The fuse for the windows is in the engine compartment fuse box but, that is not the problem because the other windows still work.

I can't find a fuse or relay for it but by what your telling me it sounds like the window motor is no good to test it you need to remove the door panel and manually power it up with a test light

Something simple to try is with the engine running keep your finger on the window switch operating it in the opposite direction the window is now in, open the door and slam it closed, if the motor brushes have stopped on a "bad spot" on the motor slamming the door may jar the motor and get it to work but does signify a problem most likely to be in the motor. Also wiggle the wires where the wires go from the cars body to the door as you try to operate the motor and see if the wires may be freyed from flexing. End result is the door needs to be disassembled to perform electrical tests on the motor and switch.