ignition switch

just did this today, hope it helps. under the steering column you have three screws, two on the steering wheel side and one right in the center, tilt the steering wheel all the way up and remove all three screws. pull the right side of the cover over the key cylinder and it should drop off. your ignition switch is the dark brown cylinder on the left side of the steering column being held on with two screws. remove those two screw, follow the wires down the column to the connection, pull straight down to remove the connection from the column and then disconnect it from the main harness. installation is the reverse.

I would go to www.alldatadiy.com and pay a few dollars for the factory instructions.